lighting
#1
lighting
for '03 protege, the manual gives the wattage for the bulbs, but not the type #! (which doesn't make sense) so let me see if i have this right.....
headlights = H4/9007
turn lights/reverse = 1157
sidemarkers/license plate and all the little wedge bulbs = 194 (?)
dome light = i forget the #
can anybody at to the list or correct me if i'm wrong?
i'm replacing all the bulbs so i want to be sure i'm getting the right ones and the right amount of them!
headlights = H4/9007
turn lights/reverse = 1157
sidemarkers/license plate and all the little wedge bulbs = 194 (?)
dome light = i forget the #
can anybody at to the list or correct me if i'm wrong?
i'm replacing all the bulbs so i want to be sure i'm getting the right ones and the right amount of them!
#5
it wasnt meant as a smart *** comment, i'm a little confused because every other car forum there are lots of threads about lighting and bulb upgrades, so i'm a little surprised at there being no responses or a section in the FAQ about lighting, that's all.........
#6
Here's what I have for a P5
Low Beam Bulb H7 55W (?)
High Beam Bulb 9005 (HB3)
Fog Light Bulb H3
Front Turn Signal Bulb 1157NA 26.88/7.55 MiniWedge Dual Contact/Dual Filament
Rear Turn Signal Bulb 210Y 12V 21W
Rear Brake Light 7443
License Plate 3652
Reverse Light 921
Front Sidemarker 168 MiniWedge Dual Contact/Single Filament
Map Light 168 MiniWedge Dual Contact/Single Filament
Dome Light DE3175 10x36mm
Trunk Light 168 MiniWedge Dual Contact/Single Filament
Low Beam Bulb H7 55W (?)
High Beam Bulb 9005 (HB3)
Fog Light Bulb H3
Front Turn Signal Bulb 1157NA 26.88/7.55 MiniWedge Dual Contact/Dual Filament
Rear Turn Signal Bulb 210Y 12V 21W
Rear Brake Light 7443
License Plate 3652
Reverse Light 921
Front Sidemarker 168 MiniWedge Dual Contact/Single Filament
Map Light 168 MiniWedge Dual Contact/Single Filament
Dome Light DE3175 10x36mm
Trunk Light 168 MiniWedge Dual Contact/Single Filament
#8
For that I can be good example of using higher watts bulbs to ruin headlight assembly.
I had to replace new headlight along with new socket and wires.
after going through all these pains I have finally bought HID kit.
I feel so safe and no more worries for me
I had to replace new headlight along with new socket and wires.
after going through all these pains I have finally bought HID kit.
I feel so safe and no more worries for me
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)