MAZDA Recalls

Check for recalls on your vehicle by make, model, and year.





Frequently Asked Questions - FAQ


What is a recall notice?

A vehicle recall is an announcement from a vehicle manufacturer or from the National Highway Transportation and Safety Association (NHTSA) that the vehicle or some aspect of the vehicle, including motor, car seats, trim and tires, fails to meet minimum safety standards and should be corrected. A recall notice can affect just a few vehicles within a certain make, be applicable to those with specialized parts or trims, or cover an entire line of make or model. Recalls can be for something as major as airbag or tire failures, or for something smaller like an engine valve malfunction which causes the fuel gage to stop working. Famous examples include the Ford Pinto recall when it was discovered that the gas tanks could become pierced by rear bolts, and thus explode; and the Takata air bag recall which addressed air bags exploding under certain conditions.


Are recalls mandatory?

Since vehicle and equipment recall notices are issued for safety, owners should make arrangements to bring the vehicle to the manufacturer to correct the problem. In certain extreme cases of safety violations, the recall notice will indicate that the owner should not drive the vehicle.


Do I have to pay or will the manufacturer pay for the recall related repairs?

Manufacturers are required to pay for safety recall-related repairs for any car that is 15 years old or younger (from the date sold to the first owner). It's possible that manufacturers will also pay for older vehicles, depending on the repair and scope of the issue.


How do I find out if there is a recall on my vehicle?

Vehicle owners should receive a notice in the mail from any safety recall, but the (website) Recall tool will allow you to select recalls by vehicle year, make, and model.

MAZDA Recent Recalls

  • MAZDA CX-50

    SUSPENSION: CRITICAL FASTENERS

    Running Sequence Number: 295383

    Campaign Number: 25V737000

    Make: MAZDA

    Model: CX-50

    Year: 2025

    MFR Campaingn Number: 7925J

    Component Name: SUSPENSION: CRITICAL FASTENERS

    Manufacturer: Mazda North American Operations

    Begin Date of Manufacturing: Jan 29, 2025

    End Date of Manufacturing: Feb 17, 2025

    Vehicle, Equipment or Tire Report: V

    Potential Number of Units Affected: 1007

    Date Owner Notified: Dec 10, 2025

    INFLUENCED_BY: MFR

    Manufacturers of Recalled Vehicles: Mazda Motor Corp.

    Report Received Date: Oct 29, 2025

    Record Creation Date: Oct 30, 2025

    Regulation Part Number: N/A

    Federal Motor Safety Standard Number: N/A

    Summary: Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.

    Consequence: Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.

    Remedy: Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.

    Notes: N/A

    Recall Component ID: 000260702005672656000001653

    Manufacturer-Supplied Component Name: Bolt

    Manufacturer-Supplied Component Description: Shaft strap bracket bolt

    Manufacturer-Supplied Component Part Number: FT1C-25-123A

    Do Not Drive: No

    Park Outside: No

  • MAZDA CX-50

    SUSPENSION: CRITICAL FASTENERS

    Running Sequence Number: 295365

    Campaign Number: 25V737000

    Make: MAZDA

    Model: CX-50

    Year: 2025

    MFR Campaingn Number: 7925J

    Component Name: SUSPENSION: CRITICAL FASTENERS

    Manufacturer: Mazda North American Operations

    Begin Date of Manufacturing: Jan 29, 2025

    End Date of Manufacturing: Feb 17, 2025

    Vehicle, Equipment or Tire Report: V

    Potential Number of Units Affected: 1007

    Date Owner Notified: Dec 10, 2025

    INFLUENCED_BY: MFR

    Manufacturers of Recalled Vehicles: Mazda Motor Corp.

    Report Received Date: Oct 29, 2025

    Record Creation Date: Oct 30, 2025

    Regulation Part Number: N/A

    Federal Motor Safety Standard Number: N/A

    Summary: Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.

    Consequence: Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.

    Remedy: Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.

    Notes: N/A

    Recall Component ID: 000260702005672656000001653

    Manufacturer-Supplied Component Name: Nut

    Manufacturer-Supplied Component Description: Tie-rod end nut

    Manufacturer-Supplied Component Part Number: 9YB04-1208

    Do Not Drive: No

    Park Outside: No

  • MAZDA CX-50

    SUSPENSION: CRITICAL FASTENERS

    Running Sequence Number: 295377

    Campaign Number: 25V737000

    Make: MAZDA

    Model: CX-50

    Year: 2025

    MFR Campaingn Number: 7925J

    Component Name: SUSPENSION: CRITICAL FASTENERS

    Manufacturer: Mazda North American Operations

    Begin Date of Manufacturing: Jan 29, 2025

    End Date of Manufacturing: Feb 17, 2025

    Vehicle, Equipment or Tire Report: V

    Potential Number of Units Affected: 1007

    Date Owner Notified: Dec 10, 2025

    INFLUENCED_BY: MFR

    Manufacturers of Recalled Vehicles: Mazda Motor Corp.

    Report Received Date: Oct 29, 2025

    Record Creation Date: Oct 30, 2025

    Regulation Part Number: N/A

    Federal Motor Safety Standard Number: N/A

    Summary: Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.

    Consequence: Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.

    Remedy: Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.

    Notes: N/A

    Recall Component ID: 000260702005672656000001653

    Manufacturer-Supplied Component Name: Nut

    Manufacturer-Supplied Component Description: Front lower arm ball joint nut

    Manufacturer-Supplied Component Part Number: 9YB04-1031

    Do Not Drive: No

    Park Outside: No

  • MAZDA CX-50

    SUSPENSION: CRITICAL FASTENERS

    Running Sequence Number: 295371

    Campaign Number: 25V737000

    Make: MAZDA

    Model: CX-50

    Year: 2025

    MFR Campaingn Number: 7925J

    Component Name: SUSPENSION: CRITICAL FASTENERS

    Manufacturer: Mazda North American Operations

    Begin Date of Manufacturing: Jan 29, 2025

    End Date of Manufacturing: Feb 17, 2025

    Vehicle, Equipment or Tire Report: V

    Potential Number of Units Affected: 1007

    Date Owner Notified: Dec 10, 2025

    INFLUENCED_BY: MFR

    Manufacturers of Recalled Vehicles: Mazda Motor Corp.

    Report Received Date: Oct 29, 2025

    Record Creation Date: Oct 30, 2025

    Regulation Part Number: N/A

    Federal Motor Safety Standard Number: N/A

    Summary: Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.

    Consequence: Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.

    Remedy: Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.

    Notes: N/A

    Recall Component ID: 000260702005672656000001653

    Manufacturer-Supplied Component Name: Nut

    Manufacturer-Supplied Component Description: Lock nut

    Manufacturer-Supplied Component Part Number: D651-33-042A

    Do Not Drive: No

    Park Outside: No

  • MAZDA CX-50

    SUSPENSION: CRITICAL FASTENERS

    Running Sequence Number: 295389

    Campaign Number: 25V737000

    Make: MAZDA

    Model: CX-50

    Year: 2025

    MFR Campaingn Number: 7925J

    Component Name: SUSPENSION: CRITICAL FASTENERS

    Manufacturer: Mazda North American Operations

    Begin Date of Manufacturing: Jan 29, 2025

    End Date of Manufacturing: Feb 17, 2025

    Vehicle, Equipment or Tire Report: V

    Potential Number of Units Affected: 1007

    Date Owner Notified: Dec 10, 2025

    INFLUENCED_BY: MFR

    Manufacturers of Recalled Vehicles: Mazda Motor Corp.

    Report Received Date: Oct 29, 2025

    Record Creation Date: Oct 30, 2025

    Regulation Part Number: N/A

    Federal Motor Safety Standard Number: N/A

    Summary: Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.

    Consequence: Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.

    Remedy: Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.

    Notes: N/A

    Recall Component ID: 000260702005672656000001653

    Manufacturer-Supplied Component Name: Bolt

    Manufacturer-Supplied Component Description: Front lower arm ball joint bolt

    Manufacturer-Supplied Component Part Number: 9YA02-101H

    Do Not Drive: No

    Park Outside: No


All times are GMT -5. The time now is 11:24 PM.