trickedoutP5

hey guys, I just recieved my front air dam for the protege5 from dgmotorsports and i was wondering how you install it, please help me out, RODSCALIP you would defenitly know how to

RODSCALIP5

Alright check this out.............If you have someone to help you it wold be better. The lip should just snap right on. Start off on the driver side, put that side on first, then when you get to the passenger side bring it from the bottom to the top. The lip is flexible so don't be scared of pulling a little to make it snap on. After its on, just put the screws on and that should be it.

trickedoutP5

I got it snapped on, but what screws, I didn't get no screws and there is no holes to screw them in anyway, besides it ain't going to fall off even with the screws out, thanks
Do you know if dgmotorsports is going to make a autoexe grill replica, because I would defenitly buy one and so would a bunch of other people

thanks

RODSCALIP5

I dont think Dg is going to produce the grill, I think you should still put those screws on though

trickedoutP5

What screws? I didn't get no screws and there is absolutely no holes to put a screw of any sort, please inform me on this

thanks

RODSCALIP5

Just to to any hardware store find a pair of screws you like and drill them on the side to hold the front lip. With the original Autoexe the holes were already drilled and with the dgm its an option if you want. The dgm is tight fit so I doubt itll fall off.

MikeD

Here is a simple and better looking option in my opinion. Instead of screws, use the push/snap-on plugs like the ones that your fender-liners are attached with. True the hole will be bigger but its a much cleaner and more "factory" looking way to do it. Thats what I did.

Hope this helps
Jeremy