blonder1pr

HI My car was working perfectly suddenly when i was parking my car the car turn off. When I the turn on again the car no want accelerate The RPM keep in 800.The cluster light of CEL and Battery turn ON.The battery is new. When i put the machine to read the codes say:
1- P0113(Intake Air Temperature Circuit High Input)
2-P2228(BARO sensor circuit high input)
3-p2138(pedal sensor)
What i do: I clean the trotel complete, I change the flow meter and i clear all the codes with the machine and they appear again. If i try to accelerate the car he began with some problem and turn off. But the car turn on without problem. Thanks PLEASE HELP ME

djs2571

sounds like a connector fell off, or maybe a ground broke when you turned the car off - or one fried / overheated when you started it.
What is the CEL light?
It won't accelerate cause of the pedal sensor code - you don't want a runaway toyota wannabe.
If you have a scan tool, it should allow you to see the real time pedal position and such, could help you debug.

blonder1pr

The cel is check engine light

djs2571

check for evidence of mice / rodents chewing through wires... sounds like a wire broke / connector is unplugged.