Problem with mazda 3 2.3l 2005
 

HI My car was working perfectly suddenly when i was parking my car the car turn off. When I the turn on again the car no want accelerate The RPM keep in 800.The cluster light of CEL and Battery turn ON.The battery is new. When i put the machine to read the codes say:
1- P0113(Intake Air Temperature Circuit High Input)
2-P2228(BARO sensor circuit high input)
3-p2138(pedal sensor)
What i do: I clean the trotel complete, I change the flow meter and i clear all the codes with the machine and they appear again. If i try to accelerate the car he began with some problem and turn off. But the car turn on without problem. Thanks PLEASE HELP ME

sounds like a connector fell off, or maybe a ground broke when you turned the car off - or one fried / overheated when you started it.
What is the CEL light?
It won't accelerate cause of the pedal sensor code - you don't want a runaway toyota wannabe.
If you have a scan tool, it should allow you to see the real time pedal position and such, could help you debug.

The cel is check engine light

check for evidence of mice / rodents chewing through wires... sounds like a wire broke / connector is unplugged.