Atticus

i have 02 pr and just purchased a nitrous works wet kit and was wandering one where is the best place to tap in to the fuel line and do i need a fuel pressure switch aka hobbs switch? never installed one on a p5 so please help. thanks

Patio

OK, im going to describe this the best I can without pics


remove your intake and battery, and the mounting for the battery

youll see the 2 brackets that hold the battery mount (black) to the left of them, you'll see a black tube about maybe 1/4" thick, maybe slimmer im not sure, the tube looks like it comes from the firewalls lower part to a clip on the right of the top of the motor, where it clips on to a mount of 2 white/lightly colored clips, this tube is your fuel line, you can splice it wherever is best for it to run to the fuel solinoid. The black tube (fuel line) will have a black soft loom on it before it get to the clip on the motor. I would suugest splicing before the loom, coming from the firewall forward.

hopefully this helps

I mounted my solinoids under my battery mount, so you cant see them hehe and the nozzle is on the bottom of the intake, so you cant see much either, all my lines are wire loomed, so you cant see much at all

good luck, and good choice on the kit!!!!

I'd run a 50 shot untill you get a better clutch