Just Ordered my turbo manifold and Downpipe from Hiboost!!
 

Talked to Juan today.....He said the manifold is in stock...waiting on the downpipe, will be there in 2-3 days !!!!....Looking at a T25 on ebay...should be ordering it today too....

Just had to get that out there....I'm excited !!! :buttslay:

another one bites the bug.....

make sure you get an oil/coolant cooled T25...they'll last a lot longer. If you want a new T25 let me know and I can flex some connections and get you one pretty cheap.

^^^ about $250+shipping for a new T25 with .48/.49 trim

WHERE ??? I was looking at some from SSautochrome that were $300 but they were TD04's with a T25 flange and greddy internals....I wasnt sure if the DP would work ???

I wanna buy it pretty soon...I just bought my wife that car, so I got the "no bitch" clause no matter what I buy for a few months

Very interested Matty...get me the info ASAP!!!! Are they internally wastegated...I would prefer if they are...also if so what's the wastegate set at...

yes they are internal wastegates. They are coming from japan so shipping is estimated at $70. I'll pm you the info.

ack ! Japan ??....what's the turnaround time ???

you'd get it within a week or two. I ordered the turbo for the scooter from them and it took about 6 business days.

Yay ! Found out 88-92 MX6GT injectors are drop in plug and play...310cc injectors...should be plenty enough fuel over my puny 155cc stockers

Found a set on MX6.com for $15

Also found a good SMIC from an MX6GT for $30

I also ordered an Exedy stage 2 clutch for $149 shipped

I'm gonna end up having his car turbo'd for like $1200 :101384_l:

good deal, be sure to post pics of everything.

found a LOW mileage T25 from a 98GSX eclipse...$200....on it's way too

spending spree !!!

intercooler is otw too....

I just need:

FMU,turbo oil feed and drain,turbo coolant lines,bypass valve, and intercooler piping...

IM INSANE !!!

I just ordered my T25 oil feed/drain kit, and T25 waterline kit.....

I'm down to my BPV and intercooler piping....

seeing as how I'm using so many MX6 parts, I might go to the junkyard to see about getting the MX6 BPV and intercooler piping to work...engine sits in the bay the same way, as does the turbo, so if I mount the intercooler in the right spot, it might just work !!!!

Total spent(including shipping)

manifold $375
downpipe $150
Garrett T25 $225
intercooler $40
injectors $15
Exedy Stage 2 Clutch Kit $149
turbo oil line kit $85
turbo water line kit $40

Total = $1079

sounds good. the piping may only need minor adjustment to fit well. now where are those pics??

i don't have sh** yet....everything has been ordered in like the last 3-4 days

oh ok...get a picture or three of the pile of parts...and then a picture of everything installed...then say "before and after"