tach autometer
December-9th-2001, 09:53 PM
#1
license and registration?
Thread Starter
Join Date: Oct 2001
Location: fremont ca
Posts: 116
tach autometer
auto meter tach
ok i just bought a tach but i have a problem
i dont know where the green wire goes on my 2.0 pro (i know it goes to the coil but it seems i cany find it )(is it the two black things on my valve cover)
can any one help me puting this s%^t on
ok i just bought a tach but i have a problem
i dont know where the green wire goes on my 2.0 pro (i know it goes to the coil but it seems i cany find it )(is it the two black things on my valve cover)
can any one help me puting this s%^t on
January-6th-2002, 02:56 AM
#2
Protege Newbie
Join Date: Dec 2001
Location: california
Posts: 33
Thank's to Mike Lucero...
I finally able to install autometer in my car without re-calibrate them.
the green wire that should have go to coil must be connected into the diagnostic box. Look for a purple and white wire (purple with a white stripe) and hook it up to the autometer.
the two black box over the engine is the coil (coil on ignition system), but you cannot use them because it won' t work with the autometer ( i have try ).
I finally able to install autometer in my car without re-calibrate them.
the green wire that should have go to coil must be connected into the diagnostic box. Look for a purple and white wire (purple with a white stripe) and hook it up to the autometer.
the two black box over the engine is the coil (coil on ignition system), but you cannot use them because it won' t work with the autometer ( i have try ).
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)