tach autometer
 

auto meter tach
ok i just bought a tach but i have a problem
i dont know where the green wire goes on my 2.0 pro (i know it goes to the coil but it seems i cany find it )(is it the two black things on my valve cover)

can any one help me puting this s%^t on

Thank's to Mike Lucero...
I finally able to install autometer in my car without re-calibrate them.

the green wire that should have go to coil must be connected into the diagnostic box. Look for a purple and white wire (purple with a white stripe) and hook it up to the autometer.

the two black box over the engine is the coil (coil on ignition system), but you cannot use them because it won' t work with the autometer ( i have try ).