Installing two single DIN units...please help
#1
Installing two single DIN units...please help
I have asked before but still am not exactly sure...I am wanting to install a single DIN monitor, and a single DIN DVD player. A few questions...
How do I get or make brackets for the bottom unit so that it stays in place?
Do I need two wiring harnesses or how does that work?
If I connect a Dreamcast externally how do I get power...do I splice the power cord and connect to a power wire in the car?
Any help would be greatly appreciated!
Adam
How do I get or make brackets for the bottom unit so that it stays in place?
Do I need two wiring harnesses or how does that work?
If I connect a Dreamcast externally how do I get power...do I splice the power cord and connect to a power wire in the car?
Any help would be greatly appreciated!
Adam
#2
I didn't make a bracket for mine. I have a monitor and head unit, and I just put them both in, and the metal braces that come with the unit, I bent the prongs so that they would get securly on eachother and in the dash area. Some people have actually made brackets, but, my way worked, and worked fine. Also, all the video and audio rca cables made it have a super snug fit, since there's barely room to get it all in
I did one wire harness, and then spliced into the wires, like 4" from the harness, and connected the proper wires to the other unit.
The power to the DreamCast should come from an inverter, which should be connected directly to the battery terminals.
I did one wire harness, and then spliced into the wires, like 4" from the harness, and connected the proper wires to the other unit.
The power to the DreamCast should come from an inverter, which should be connected directly to the battery terminals.
Thread
Thread Starter
Forum
Replies
Last Post
slip415
Exterior/Interior/Audio
1
July-16th-2003 06:11 AM
MunkeyManProteg
Exterior/Interior/Audio
3
January-23rd-2003 06:56 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)