where did you mount it to, and with what?

I see that everybody with an injen has moved it - did the intake include a bracket for the reservoir, or did you just fabricate something??

I see the tank just slides off the stock bracket - did you just move the bracket to a different set of holes? which ones? pics?

I don't have an injen, but i want to move my tank. Thx for any help guys!

 

VERY SIMPLE...i did this for the MHP CAI....i cut off like 3 or 4 inches of the mounting bracketand angled it diffrent...it was easty i am at work now so i will take pix when i get home probably have em up after work tomarrow....hope that helped as mucha s it could...ill get back to u

 

I've installed a K&N cone filter. I just rotated the bracket 180-deg. and found a couple of mounting holes. I did have a few screws left over because the airbox is gone .
If you check my pics of the K&N install in my gallery, you will see the bracket just under the cone filter.
There are two bolts that will meet up if you rotate the bracket. Then I just cut the overflow hose to length done.
Time to complete...5 mins , Time to figure it out...2 hrs!

 

My catch can came with a bracket. Here you go.

 

Where'd you get that Injen coolant reservoir?!

 

most likey from the InJen factory...

anywho.. click on my www button to see the injen cai install, i have an overhead view of the coolant res. too!
________
Marijuana Card

 

I got it from my brother, who baught it for his Eclipse but didn't need it anymore.

I showed it here when I first got it and everyone went scurrying to find them. I haven't seen them sold anywhere and believe Injen stoppped producing them. If you do a search for "Injen Catch Can" you might find our original discussions about it.