those who have moved their coolant reservoir
where did you mount it to, and with what?
I see that everybody with an injen has moved it - did the intake include a bracket for the reservoir, or did you just fabricate something?? I see the tank just slides off the stock bracket - did you just move the bracket to a different set of holes? which ones? pics? I don't have an injen, but i want to move my tank. Thx for any help guys! :cool: |
VERY SIMPLE...i did this for the MHP CAI....i cut off like 3 or 4 inches of the mounting bracketand angled it diffrent...it was easty i am at work now so i will take pix when i get home probably have em up after work tomarrow....hope that helped as mucha s it could...ill get back to u
|
Re: coolant reservoir
I've installed a K&N cone filter. I just rotated the bracket 180-deg. and found a couple of mounting holes. I did have a few screws left over because the airbox is gone ;) .
If you check my pics of the K&N install in my gallery, you will see the bracket just under the cone filter. There are two bolts that will meet up if you rotate the bracket. Then I just cut the overflow hose to length done. Time to complete...5 mins :) , Time to figure it out...2 hrs! :D |
|
Where'd you get that Injen coolant reservoir?!
|
Originally posted by NegatiZE Where'd you get that Injen coolant reservoir?! anywho.. click on my www button to see the injen cai install, i have an overhead view of the coolant res. too! ________ Marijuana Card |
Originally posted by NegatiZE Where'd you get that Injen coolant reservoir?! I showed it here when I first got it and everyone went scurrying to find them. I haven't seen them sold anywhere and believe Injen stoppped producing them. If you do a search for "Injen Catch Can" you might find our original discussions about it. |
All times are GMT -5. The time now is 08:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands