walight01

i am taking out my shifter to make a custom short shifter, but i can't get the retaining ring out!!! i don't have snap ring pliers. anyone have any advise on how to get it out???

KYREDP5

The best thing to do it go get some snap ring pliers. Needle nose might work if they were small enough.

Arghman

Dude, seriosuly, my friend and ihad some old needlenose plyers and we sharpened them on the sidewalk to make them a little smaller and stuff, but it still worked like crap.
Getting an $8 pair of o-ring pliers will work A HELL of a lot better and they will save you a lot of time dude, trust me on this :P

walight01

ok i went out and bought the snap ring pliers, but i can't figure out how to get that ring help, can someone explain to me how its supposed to come out, i can't find detailed instructions on the net anywhere

arapau

I have taken this snap ring out without pliers. It's not too hard, but installation is nearly impossible. There are little gaps just behind the ends. You can use a small screwdriver to pry ends out of slot. Then work ring carefully out of slot. I've installed the ring without pliers but really don't recommend it. Get pliers

macklum

The snap ring has 2 holes ,these are near the gap in the snap ring . Put the points in the holes of the ring ,squeeze the pliers together ,this will make the ring smaller and easy to just lift out . Do the reverse to put it back together.

walight01

I GOT PLIERS. the ring is the big white thing with the little nipples sticking up right, or is there a normal little silver snap ring

Hawkeye

I'm not sure what you're talking about, but it's not the retaining ring. Mine was black. Get a pic, or at least a more detailed description.

KYREDP5

It's black and above the white one your looking at. It's got 2 small holes at one end.

walight01

ok thanx i'll go look

walight01

i feel like a moron now. the holes were cakes with grease and i didn't notice it before. i extended the bottom 2.5 inches and it feels awesome.com

walight01

awesome.com if anyone in the dfw needs a short shifter, i am willing to do it for alike a burger or something