protegeboy78

I want to put in colored silocone hoses but i was curious as to waht sizes and lengths would be needed for our second gen pros

Green Skanka

well, get out a caliper, and check the I.D. (inner diameter) of the hose.... LoL, had to say that....

I really don't know what the sizes are, but somebody should...

protegeboy78

I was looking for overall length noth just diameters, i was hoping someone with the same gen and same engine as me had done this. i want to buy the hoses by the foot from nopi.com cause they are the only ones that sell white silicone hoses. well if anyone can give me an idea let me know. and i don't have a caliper and can't find my freakin tape measure either. so until i find one i can't measure them.

The_Oz

Well,

One ghetto way of doing this is to eyeball it. If it helps, get out the trusty ol' ruler. Just note how each hose is bent and stuff. If you happen to have a longer hose, it shouldn't really matter - you'll only end up having to add more coolant later. OR just cut it accordingly.

This is assuming that you already know the diameter sizes.

Good luck and keep us posted,

Oz