Do i have to take the whole bumper off just to get my head lights out? I can see the screws holding them in, atleast i think there the screws holding them in.

 

Those screws r to position the lights, n no u dont need to take off the whole bumber there should only be a few screws or mebe bolts, but u dont need to take off the whole bumper

 

Take out the grill. It'll make it easier to take out the headlight.

 

lol and so i tryied to take the grill out and broke one of those little plastic pieces that hold it in

 

just did this today, the best bet to taking your headlights out is taking off both corner lights, then your center grille (held in by one screw at the top center and four clips on each corner of the grille) then use a 10mm socket with an extension and remove the 4 bolts holding the black bracket to the headlight, this will fully remove the headlight, is most thorough and does what you need it to do.
peace

 

sorry my post was too late, but.. anyway, nice going j/k, as long as it holds on there, who the **** cares, right?
peace

 

Thats what zip-ties are for!