Front/Rear Strut Brace too stiff?
Thread Starter
Protege Enthusiast
Joined: Mar 2003
Posts: 157
From: Pittsburgh
Front/Rear Strut Brace too stiff?
Im looking into getting the corksport front and rear strut braces for my 92 323. I was talking to my tattoo artist, ( he used to have a civic hatch) and he said a lot of times when you put the rear brace in a hatch it can be too stiff and you *** end will get loose. I was wondering if anyone has the rear done and how the ride is? I was also wondering about a bolt in roll cage, Im going to do the GTX sawp this summer and want the cage for the added strength. Anyone know who sells one? Thanks a lot guys.
Protege God
Joined: Nov 2001
Posts: 2,183
From: Chicago
How can the back be "stiff" and yet "get loose" ??? You shouldn't worry about that. I have a rear strut bar. Didn't notice that much of a difference, but other people have so there's basically no negative aspects to getting it.............. not unless you are picky about weight
Guest
Posts: n/a
Originally posted by Identity_X
How can the back be "stiff" and yet "get loose" ??? You shouldn't worry about that. I have a rear strut bar. Didn't notice that much of a difference, but other people have so there's basically no negative aspects to getting it.............. not unless you are picky about weight
How can the back be "stiff" and yet "get loose" ??? You shouldn't worry about that. I have a rear strut bar. Didn't notice that much of a difference, but other people have so there's basically no negative aspects to getting it.............. not unless you are picky about weight
But a rear strut bar won't stiffen everything up that much .. as long as you are useing moderate spring rates in the rear and your sway bar is not to thick (stiff) then your good....
You'll be ok ,,, my 323 is getting both braces..
Bruce
Protege God
Joined: Nov 2001
Posts: 2,183
From: Chicago
Originally posted by SlopPerformance
sorry about the stiffness getting loose thing. i meant the back end of the car is really tight and that the rear will drift during turning.
sorry about the stiffness getting loose thing. i meant the back end of the car is really tight and that the rear will drift during turning.
Project Protege Builder
Joined: Feb 2002
Posts: 397
From: Dayton, OH USA
Originally posted by Bruce95fmla
If your rear end is to stiff .. like your spring rate is to stiff ,,.. then in a hard corner you can spin out ...
But a rear strut bar won't stiffen everything up that much .. as long as you are useing moderate spring rates in the rear and your sway bar is not to thick (stiff) then your good....
You'll be ok ,,, my 323 is getting both braces..
Bruce
If your rear end is to stiff .. like your spring rate is to stiff ,,.. then in a hard corner you can spin out ...
But a rear strut bar won't stiffen everything up that much .. as long as you are useing moderate spring rates in the rear and your sway bar is not to thick (stiff) then your good....
You'll be ok ,,, my 323 is getting both braces..
Bruce
OF course the idea situation is to do neither unless you actually want to
Guest
Posts: n/a
Originally posted by Loginology
I Think I'd rather oversteer than understeer anyways OF course the idea situation is to do neither unless you actually want to
I Think I'd rather oversteer than understeer anyways
OF course the idea situation is to do neither unless you actually want to
are you sure ??
not me ,,, I rather understeer...
with my struts on 2 in rear and 1 in front .. I can induce oversteer
with them on 2 in front and 1 in rear I can induce understeer
with them all on 2 the car is very neutral
with them all on 4 ... I need a bra
Project Protege Builder
Joined: Feb 2002
Posts: 397
From: Dayton, OH USA
Originally posted by Bruce95fmla
You would rather oversteer ??
are you sure ??
not me ,,, I rather understeer...
with my struts on 2 in rear and 1 in front .. I can induce oversteer
with them on 2 in front and 1 in rear I can induce understeer
with them all on 2 the car is very neutral
with them all on 4 ... I need a bra
You would rather oversteer ??
are you sure ??
not me ,,, I rather understeer...
with my struts on 2 in rear and 1 in front .. I can induce oversteer
with them on 2 in front and 1 in rear I can induce understeer
with them all on 2 the car is very neutral
with them all on 4 ... I need a bra
Yeah, I'd rather oversteer
. It depends on what kind of course/streets you're driving on though. I'd rather oversteer because I enjoy drifting around corners, and would be nice to finally do it in a FWD without using the e-brake
Thread
Thread Starter
Forum
Replies
Last Post
SlopPerformance
1st gen/323/GLC Suspension and Brakes
5
Jul 7, 2003 12:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
