FS: Rear Strut Brace & Front Clear Signals
July-25th-2002, 05:30 PM
#1
Protege Enthusiast
Thread Starter
Join Date: May 2002
Location: Chicago, IL
Posts: 106
FS: Rear Strut Brace & Front Clear Signals
I have these items and because I can't use them, I sell them 
I have a 98 Protege, the signals are for a 3rd gen 99-00, so those obviously don't fit, and the strut brace is infact for a 95-98 (should fit a 90-94 according to the box) but the installation is very involved on some proteges. Take a look at your rear wheel assembly under the rear dash matt (where the speakers mount through your trunk) and make sure you can run a beam through the trunk without obstruction. My suspension on the 98 has deep wells for the rear shocks, and would need to be welded out in order to install this. I opted to modify the car's frame for stiffer suspension and just got a rear stablizer bar that works with the twin trap suspension instead.
$40/ea. Both are new, unused. The corners are crystal clear, not smoked, and include bulbs and such. They typically sell for 50-60 (What I paid)
-Tim
aftermathae@hotmail.com
p.s. I AM DESPERATELY LOOKING FOR CLEARish CORNER SIGNALS for a 95-98 protege (even the signals off a 95-96 would be SUPER COOL) because one of mine is smashed and I'd just rather get clear than a replacement amber. There are no junk yards around here with them, I've looked, and will pay premium to get the CORRECT size. I've ordered 2 sets already that were suppose to be 98, they were NOT, they were 99-00 (they are shorter in side length and taller in frontal length) so I really need the right size set :\
I have a 98 Protege, the signals are for a 3rd gen 99-00, so those obviously don't fit, and the strut brace is infact for a 95-98 (should fit a 90-94 according to the box) but the installation is very involved on some proteges. Take a look at your rear wheel assembly under the rear dash matt (where the speakers mount through your trunk) and make sure you can run a beam through the trunk without obstruction. My suspension on the 98 has deep wells for the rear shocks, and would need to be welded out in order to install this. I opted to modify the car's frame for stiffer suspension and just got a rear stablizer bar that works with the twin trap suspension instead.
$40/ea. Both are new, unused. The corners are crystal clear, not smoked, and include bulbs and such. They typically sell for 50-60 (What I paid)
-Tim
aftermathae@hotmail.com
p.s. I AM DESPERATELY LOOKING FOR CLEARish CORNER SIGNALS for a 95-98 protege (even the signals off a 95-96 would be SUPER COOL) because one of mine is smashed and I'd just rather get clear than a replacement amber. There are no junk yards around here with them, I've looked, and will pay premium to get the CORRECT size. I've ordered 2 sets already that were suppose to be 98, they were NOT, they were 99-00 (they are shorter in side length and taller in frontal length) so I really need the right size set :\
Thread
Thread Starter
Forum
Replies
Last Post
SlopPerformance
1st gen/323/GLC Suspension and Brakes
5
July-7th-2003 12:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)