cams ??
July-20th-2003, 11:09 PM
#1
Protege Newbie
Thread Starter
Join Date: Jul 2003
Posts: 12
cams ??
hello
im new here and I have a mazda 323 with a swap 1.8L doch and im looking for cams.
who know the stock numbers and some modifications cams.
i want to know if the gtr(turbo) cams are more higher.
im new here and I have a mazda 323 with a swap 1.8L doch and im looking for cams.
who know the stock numbers and some modifications cams.
i want to know if the gtr(turbo) cams are more higher.
July-21st-2003, 07:30 PM
#3
Registered User
Join Date: Sep 2001
Location: Huntington Beach, CA Uhhh Surfs up Dude
Posts: 2,367
what do you plan to do with the car? what type of racing?
when you know that answer, that will tell you want cams to get. There isn't just one set of cams that do all. The way they are ground for lift and duration will put the power where you want it.
when you know that answer, that will tell you want cams to get. There isn't just one set of cams that do all. The way they are ground for lift and duration will put the power where you want it.
July-21st-2003, 10:13 PM
#7
Registered User
Join Date: Sep 2001
Location: Huntington Beach, CA Uhhh Surfs up Dude
Posts: 2,367
July-21st-2003, 11:49 PM
#8
Protege Newbie
Thread Starter
Join Date: Jul 2003
Posts: 12
Originally posted by mazdaspeedwest
what do you plan to do with the car? what type of racing?
when you know that answer, that will tell you want cams to get. There isn't just one set of cams that do all. The way they are ground for lift and duration will put the power where you want it.
what do you plan to do with the car? what type of racing?
when you know that answer, that will tell you want cams to get. There isn't just one set of cams that do all. The way they are ground for lift and duration will put the power where you want it.
i want to run 14.6 all motor with my 1.8L doch
here in Puerto Rico i run 14.9@91mph with 2.24 in 60ft(street tires)
my modifications are:
work in the motor head (port & pulish), pulish the intake manifold
a good ram air, unorthodox pulley, and a pacesetter header with 2.5" . im using the stock flow meter because my rx7 FM dont work.
my future modifications are piston 10:0:1 and cams but i dont know about cams. im looking for some orientation
July-22nd-2003, 09:03 AM
#10
BJ Slut
Join Date: Jan 2003
Location: MD
Posts: 899
how much do they cost? and my parents are sending me 300 bux a month, plus ill be working at a tuner shop when i start college, so ill have money...and i know i need to do more research, that is why i am asking around, but like what exactly is involved in changing cams etc...and can i expect power gains?
Last edited by Liquid_Ag; July-22nd-2003 at 09:06 AM.
July-22nd-2003, 09:13 PM
#11
BJ Slut
Join Date: Jan 2003
Location: MD
Posts: 899
ive not got time to do all the research i need, and i dont intend to do it now or at least not all at the same time...but i figure to be bringing in 300 a month from rents, plus about 400 a month from working at the shop, so i can save up and generally just slowly modify the car
July-23rd-2003, 01:59 PM
#12
Super mod/1st gen livin'
Join Date: Jun 2003
Location: the nati. oh hi hoe
Posts: 147
will the head gasket,pistons,etc that is on the todaracing page fit the 1.8 dohc? if this is true will a supercharger for the miata fit my protege?
Last edited by Turpro; July-23rd-2003 at 02:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)