Here are the G-Racing wheels. I posted about them in another section but here they are for everybody.

-Seki 18x7.5 +47

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=829

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=828

-Kuma 18x7.5 +48

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=833

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=832

-Niko 18x7.5 +45 (Sedan fitment only)

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=831

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=830

-Saga 17x7 +42 (will fit Sedan/ P5 Needs 205/40/17) 18x7.5 +45 (Sedan fitment only)

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=834

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=835

-Kirin 17x7 +42 (will fit Sedan/ P5 Needs 205/40/17) 18x7.5 +45 (Sedan fitment only)

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=837

http://groups.msn.com/AutomotiveRD/w...to&PhotoID=836

nice stuff contact me for pricing.
Thanks,
Sean

 

How can 2 18x7.5 with the same offset be listed as Sedan Only for one... yet will rub on lowered p5 for the other?

Arospeed RSGT 19s ... on a p5 .. possible?

pe@ce

 

The thing is that in an 18" wheel the thinnest tire you can get is a 215, whereas a 205 is available in the 17". Therefore allowing a lower offset.

Peace, Rishie

Sean or I will call and check the offset on the 19's. They are 7" wide so that is promising. I do remember thinking these will work.

 

What im sayin is the Sage and Niko --- you have them both listed as 18x7.5 with the same offset, so why does one say sedan only yet the other says it will rub on a lowered P5

Pe@ce

 

Just had it worded different. sorry for the confusion.
I will contact you later.
Sean

 

OK so basically you "can" use it on a P5 -- but the chances are it will rub unless you roll the fenders(mine are done the RIGHT way)

Pe@ce

 

If you got them rolled then it should work. but remember that there isn't much fender to roll in the back. And that is where the priblem is. It would be totally up to you to try it at that point.

Send me some pics of your fenders if possible.

Thank's,
Sean