G-Racing wheels
#1
G-Racing wheels
Here are the G-Racing wheels. I posted about them in another section but here they are for everybody.
-Seki 18x7.5 +47
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=829
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=828
-Kuma 18x7.5 +48
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=833
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=832
-Niko 18x7.5 +45 (Sedan fitment only)
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=831
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=830
-Saga 17x7 +42 (will fit Sedan/ P5 Needs 205/40/17) 18x7.5 +45 (Sedan fitment only)
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=834
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=835
-Kirin 17x7 +42 (will fit Sedan/ P5 Needs 205/40/17) 18x7.5 +45 (Sedan fitment only)
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=837
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=836
nice stuff contact me for pricing.
Thanks,
Sean
-Seki 18x7.5 +47
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=829
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=828
-Kuma 18x7.5 +48
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=833
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=832
-Niko 18x7.5 +45 (Sedan fitment only)
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=831
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=830
-Saga 17x7 +42 (will fit Sedan/ P5 Needs 205/40/17) 18x7.5 +45 (Sedan fitment only)
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=834
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=835
-Kirin 17x7 +42 (will fit Sedan/ P5 Needs 205/40/17) 18x7.5 +45 (Sedan fitment only)
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=837
http://groups.msn.com/AutomotiveRD/w...to&PhotoID=836
nice stuff contact me for pricing.
Thanks,
Sean
Last edited by wheelguruuu; February-11th-2003 at 12:42 PM.
#3
The thing is that in an 18" wheel the thinnest tire you can get is a 215, whereas a 205 is available in the 17". Therefore allowing a lower offset.
Peace, Rishie
Sean or I will call and check the offset on the 19's. They are 7" wide so that is promising. I do remember thinking these will work.
Peace, Rishie
Sean or I will call and check the offset on the 19's. They are 7" wide so that is promising. I do remember thinking these will work.
#7
should work
If you got them rolled then it should work. but remember that there isn't much fender to roll in the back. And that is where the priblem is. It would be totally up to you to try it at that point.
Send me some pics of your fenders if possible.
Thank's,
Sean
Send me some pics of your fenders if possible.
Thank's,
Sean
Thread
Thread Starter
Forum
Replies
Last Post
TitaniumMSP
3rd Gen Protege/MazdaSpeed/P5/MP3
4
April-3rd-2005 12:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)