3rd gen Engine/Drivetrain Engine/Drivetrain Modification Discussions for 1999-2003 Models Only (BJ chassis)

problems downshifting from 5th gear while highway driving

Thread Tools
 
Search this Thread
 
Old Aug 5, 2003 | 02:19 PM
  #1  
bizsnatch's Avatar
Thread Starter
Protege Newbie
 
Joined: Aug 2002
Posts: 43
From: Calgary
bizsnatch is on a distinguished road
problems downshifting from 5th gear while highway driving

my protege5 recently had the clutch components replaces because of very bad chatter problems (flywheel, plate, i believe)

the car has 33,000km and no longer chatters BUT now has a problem that I never encountered before. when highway driving in 5th gear at about 120km/h it grinds when i try to downshift to 4th gear to pass someone.

its almost as if the lock that prevents you from putting it into reverse is kicking in - but i'm NOT putting it into reverse, i'm dropping it into 4th. i've had the car for over a year and never encountered this problem before (for those that are going to claim driver error ive driven standard for over 10 years)

need to get some advice, will be calling the dealership when i'm back in town this week! is this something they will say happens every now and then? am i trying to downshift too hard and perhaps there is a new mechanism to prevent it?
Old Aug 5, 2003 | 02:21 PM
  #2  
THEGOLDPRO's Avatar
YEAH WOW CHILDISH!
 
Joined: Jul 2002
Posts: 1,727
From: under your bed
THEGOLDPRO is on a distinguished road
hmmmmmmmm might be your 4th gear syncro, just a thought. or maybe your clutch isn't fully engaging. causing the grinding noise. either way i would have it looked at.
Old Aug 5, 2003 | 06:08 PM
  #3  
Sir Nuke's Avatar
Master of All Things :{D
 
Joined: Feb 2002
Posts: 4,118
From: southeast texas, near houston
Sir Nuke is on a distinguished road
if its done this ever since you just got your clutch replaced? if so, take it back to whomever did that work and have them fix your NEW problem.....seeing as how it seems to have manifested itself when they did the clutch work.
Old Aug 5, 2003 | 09:57 PM
  #4  
walight01
Guest
 
Posts: n/a
my tranny would grind every time you put it into third and finially everything inside broke at once, the rebuild bill was 2500 bucks....thank god for warranty
Old Aug 6, 2003 | 05:52 AM
  #5  
guitargod's Avatar
Protege Enthusiast
 
Joined: Jan 2003
Posts: 116
guitargod is on a distinguished road
Why are you putting it in 4th to pass.

In our cars the gear ratio's are so close together that you shouldn't have to put it in 4th, especially if your going 120Km/hr.
That is why they designed it that way.
Old Aug 7, 2003 | 11:18 AM
  #6  
kenchan's Avatar
Protege Enthusiast
 
Joined: Mar 2003
Posts: 405
From: Chicagoland
kenchan is on a distinguished road
i use 3rd gear to pass sometimes. just noise, no go though.

your tranny shouldn't grid, take it back. i shift 5-4 all the time
and since the ratio's are so close (only like a 400rpm difference)
the syncro's shouldnt need to do much work.

when you shift, do pause for a breif split second to add slight
pressure on the gate before actually entering the gate?
that helps preserve your syncro.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
netmask
3rd Gen Protege/MazdaSpeed/P5/MP3
4
Mar 31, 2006 10:59 AM
HotPro94
1st gen/323/GLC Engine and Drivetrain
2
Apr 22, 2004 05:19 PM
JFanaselle
3rd gen Engine/Drivetrain
12
Mar 16, 2003 07:59 PM
walight01
3rd gen Engine/Drivetrain
8
Oct 19, 2002 07:29 PM
redsea
3rd Gen Protege/MazdaSpeed/P5/MP3
9
Feb 23, 2002 11:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:28 AM.