Started on Interior
January-22nd-2005, 11:29 AM
#1
The Jamaican Sensation
Thread Starter
Join Date: Jan 2005
Location: Montgomery, AL
Posts: 2,662
Started on Interior
Well...after some careful thought...I decided on the same color scheme I went with on my white Eclipse. I decided to go with a Medium blue with pearl flakes. Unfortunately I only had a chance to do the gauge bezel and the surround on my head unit...it was all scratched up, so I had to sand it down til it was nice & smooth....it was entirely to cold last night and I don't have a garage. Hopefully it warms up a bit and I'll start working on the center piece and the door trim (still waiting on the info on the door trim & the center Flyin Hawaiian!!)
Anywho...here's what i got so far:
2 coats primer...3 coats blue pearl.
Anywho...here's what i got so far:
2 coats primer...3 coats blue pearl.
Last edited by JDM-P5; January-22nd-2005 at 11:34 AM.
January-22nd-2005, 12:50 PM
#6
The Jamaican Sensation
Thread Starter
Join Date: Jan 2005
Location: Montgomery, AL
Posts: 2,662
Yeah...I'm itching to get it done...thanks for the comments. Any clue as to how I get the switch panels/trim off the door?? If not, I'll have to start taking everything apart...lol.
January-22nd-2005, 02:10 PM
#7
Registered User
Join Date: Jun 2004
Location: Columbus, Ohio
Posts: 262
its just lifts off of the bottom, just make sure not to scratch it. I used a flathead screwdriver with tape on the tip, came right off and then you can remove the switch panel off leaving you with just the housing.
January-28th-2005, 10:28 AM
#9
The Jamaican Sensation
Thread Starter
Join Date: Jan 2005
Location: Montgomery, AL
Posts: 2,662
Well, I have a half day of work today and I'll be finishing the interior hopefully in the afternoon....I got the door panels off lastnight (thanks to those who helped me w/that...you're right..it's FAKWKING EASY!)...going to hit up the center console and git'r'rdone. Stay tuned and watch for the write up.
-Phil
-Phil
January-28th-2005, 12:02 PM
#12
The Jamaican Sensation
Thread Starter
Join Date: Jan 2005
Location: Montgomery, AL
Posts: 2,662
Originally Posted by Roddimus Prime
looks good man, I hope you don't over-do it though.
I like that blue color. I'll have to show you what color I'm doing my valve cover and engine brackets in....
I like that blue color. I'll have to show you what color I'm doing my valve cover and engine brackets in....
Ms. K...I love your sly remarks!
January-28th-2005, 01:14 PM
#15
Registered User
Join Date: Nov 2004
Location: Santa Maria, Ca.
Posts: 35
The inside dorr handles take a philips and you just have to pop the rod connected to them off. The switch consol just pops out, might need to use a little force, unplug the unit, then you can un-screw the plate. I did mine when I painted my body kit. I'll try to locate some pics. Good luck. btw, Looking sweet.