Mazda3/Mazdaspeed3 Engine/Drivetrain Modification Discussions for the Mazda3 and MazdaSpeed3

Engine knocking

Thread Tools
 
Search this Thread
 
Old April-19th-2010, 10:31 AM
  #1  
Registered User
Thread Starter
 
yhzramprat's Avatar
 
Join Date: Mar 2010
Posts: 6
yhzramprat is an unknown quantity at this point
Unhappy Engine knocking

Hi there.I have an 04 sport with apx 260kms on it.The other day while sitiing in a drive thru i noticed i slight "knock"in my engine.I drove a few hundred feet to my work parking lot and the knock was more noticeable.Instead of driving it i had it flatbedded home to avoid further damage!I have removed the plugs,valvepan cover to look for visible damage.The cams look fine and from what i can see the lifters appear to be fine but i cant really get a good look at them!To try and pin point the knock,well its hard to say almost an middle to upper right to center of engine.It doesnt do it untill the revs are up.At idle its barely noticable!But def sounds as if somethings broke and rattling around somewheres.Im going to put it back together and take it to the shop.Ive read about a "knock sensor?"could that be it?Also ive read about the intake flap problem but i really dont figure that to be the problem!Any ideas would be great , the cheapest engine i can find is 5000kms away and 2500 CDN.Ouch!Thanks!!!!!
yhzramprat is offline  
Old April-22nd-2010, 10:29 PM
  #2  
Registered User
 
Carl's Avatar
 
Join Date: Apr 2010
Location: Calgary
Posts: 6
Carl is an unknown quantity at this point
Same thing happened to me. turns out the pistons were hitting the valves. now I need a new engine. Yours looks out of warranty though.
Carl is offline  
Old April-23rd-2010, 08:10 AM
  #3  
Registered User
Thread Starter
 
yhzramprat's Avatar
 
Join Date: Mar 2010
Posts: 6
yhzramprat is an unknown quantity at this point
no,no warranty!Now im faced with tthe decision of replace vs. rebuild!
yhzramprat is offline  
Old April-23rd-2010, 06:45 PM
  #4  
Registered User
 
Carl's Avatar
 
Join Date: Apr 2010
Location: Calgary
Posts: 6
Carl is an unknown quantity at this point
i would normaly do whatevers cheaper. but if I was faced with that decision i would look at the condition of your 3's body, mines starting to rust so i would rebuild, but if yours is mint, i would go all out on a new one.
Carl is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vincediamond
Mazda3/Mazdaspeed3
2
June-18th-2015 09:14 AM
Off2wildblue
Mazda3/Mazdaspeed3
4
May-25th-2015 11:57 AM
mwarrior
3rd gen Engine/Drivetrain
14
March-19th-2007 12:28 PM
PKCHU5
3rd Gen Protege/MazdaSpeed/P5/MP3
4
December-15th-2002 10:18 PM
jdragon
2nd gen Engine/Drivetrain
1
May-25th-2002 11:46 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Engine knocking



All times are GMT -5. The time now is 04:44 AM.