Mazda3/Mazdaspeed3 General/Maintenance Discussion of the Mazda3 and MazdaSpeed3

automatic transmission trouble

Thread Tools
 
Search this Thread
 
Old February-19th-2013, 04:30 PM
  #1  
Registered User
Thread Starter
 
kmazda7's Avatar
 
Join Date: Feb 2013
Posts: 1
kmazda7 is an unknown quantity at this point
Unhappy automatic transmission trouble

Hi,

I'm a 19 year old girl, freaking out about my car!!! If anyone can help that would be great.

I have a '04 mazda3 S with 140,000miles.
When I get in to 4th gear my car looses power. It makes a loud sound.. Sometimes it won't go pass 2000rpms. It's almost like it's in 3rd gear when the dashboard is telling me it's in 4th. Well that's what the engine sounds like.

When I'm in the lower gears it seems fine.
When I brake, it doesn't shift down properly- I'll be slowing down going 10mph and it will still say I'm in 4th gear. It's a little scary to brake.


My transmission fluid is still pink and at the correct level.
I'm hoping it's just a fault sensor or something because the other gears seem fine.

Does anyone know if this is expensive to fix? Or what seems to be wrong?
kmazda7 is offline  
Old February-20th-2013, 04:48 AM
  #2  
Registered User
 
Filthaypinoy206's Avatar
 
Join Date: Aug 2010
Posts: 15
Filthaypinoy206 is an unknown quantity at this point
Going thru the same issue gear 3&4 will go out...
Tranny replace.
Filthaypinoy206 is offline  
Old February-25th-2013, 12:08 PM
  #3  
Registered User
 
at7driver's Avatar
 
Join Date: Oct 2008
Posts: 3
at7driver is an unknown quantity at this point
I am having the same issue with my daughters 2004 Mazda 3. Car has 156,000 miles, 4 speed auto/manual transmission. Car threw the AT/CEL light and wouldnt shift out of 2nd. I took the car to a reputable shop and they diagnosed it as: All solenoids cleaned, omh'd and checked for proper operation, TCM checked for proper signals. these all checked fine. They flushed tranny/filter and on the test drive car would not shift from 3rd to 4th. I picked car up today as I mull over spending 2300 for a rebuilt tranny. On the drive home car ran great till transmission fluid warmed up, then the hard shifting from 3rd to 4th. If kept in "manual" and not shifting above 3rd no issues. Below is a link to a thread on this site that describes same symptoms and eventually the electrical connector on transmission seems the culprit. Or possibly the entire wiring harness. Its worth a read as many many hours of research has shown most people that get the soleniods/transmission rebuilt and replace the TCM/ECU still have problems. Im thinking its an electrical issue possibly pin connectors or corrosion or a faulty wiring harness. Heres the link to the thread.

https://www.mazda3club.com/mazda3-mazdaspeed3-98/2006-mazda3-transmission-electrical-demons-56392/
at7driver is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vaclavg
Mazda3/Mazdaspeed3
0
June-17th-2014 03:17 PM
KrayzieFox
3rd gen Engine/Drivetrain
5
March-19th-2006 11:22 PM
pro00
3rd gen Engine/Drivetrain
13
March-12th-2005 09:33 AM
Matty Mooling
3rd gen Engine/Drivetrain
0
March-19th-2004 01:09 PM
NoFear
1st Gen Protege/323/GLC
0
October-21st-2003 06:59 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: automatic transmission trouble



All times are GMT -5. The time now is 03:37 PM.