1st Gen Lower Tie Bars -- Official Sign Up
May-31st-2003, 07:57 PM
#1
Registered User
Thread Starter
Join Date: Sep 2001
Location: Huntington Beach, CA Uhhh Surfs up Dude
Posts: 2,367
1st Gen Lower Tie Bars -- Official Sign Up
Hey Guys,
This is the new Round #2 sign up thread for my custom lower tie bars. As soon as i have atleast 8-10 ppl, the bars will be built and shipped. Pricing will depend on the orders, so the more ppl the better. Initial pricing is $210 shipped in the USA for both front and rear bars, last time with 15 ppl, i was able to offer them at around $150-170 shipped.
The Bars are 1" OD, 4130 Chromoly with smooth mandrel bends (front only, rear is straight) and Mild Steel welded endlinks that allow the use of the factory bolts, so these bars will be direct bolt-ons. All professionally made by Boeing certified welders. The bars are also very lightweight.
All info can be found here: http://www.mazdaracer.com/pro/perf_products_tiebars.htm Please use the form as well as posting here.
thanks.
This is the new Round #2 sign up thread for my custom lower tie bars. As soon as i have atleast 8-10 ppl, the bars will be built and shipped. Pricing will depend on the orders, so the more ppl the better. Initial pricing is $210 shipped in the USA for both front and rear bars, last time with 15 ppl, i was able to offer them at around $150-170 shipped.
The Bars are 1" OD, 4130 Chromoly with smooth mandrel bends (front only, rear is straight) and Mild Steel welded endlinks that allow the use of the factory bolts, so these bars will be direct bolt-ons. All professionally made by Boeing certified welders. The bars are also very lightweight.
All info can be found here: http://www.mazdaracer.com/pro/perf_products_tiebars.htm Please use the form as well as posting here.
thanks.
June-1st-2003, 08:34 PM
#5
Registered User
Thread Starter
Join Date: Sep 2001
Location: Huntington Beach, CA Uhhh Surfs up Dude
Posts: 2,367
I'll probably have stuff shipping by the end of the month.
<edit> 3 + 1 maybe
Protoss (1 kit)
Beachnut - Scott (1 kit)
Jordan (1 kit)
? Bizob - Bob (1 kit)
<edit> 3 + 1 maybe
Protoss (1 kit)
Beachnut - Scott (1 kit)
Jordan (1 kit)
? Bizob - Bob (1 kit)
June-3rd-2003, 12:06 PM
#10
The Horns of Jericho
Join Date: Feb 2002
Location: Southern Californ-I-A (909)
Posts: 320
Originally posted by mazdaspeedwest
try to be kind to this one huh
try to be kind to this one huh
Mahahaha. Aye, I will.
I believe with this one, I'll just put it on for races however troublesome it might be. I just don't like having to slow down for small bumps during the daily driving.
I'll land up getting a hold of a strut tower bar to help stiffen her up topside. Better than nothing, I say.
June-4th-2003, 02:54 AM
#11
Protege Enthusiast
Join Date: Oct 2001
Posts: 416
Originally posted by beachnut
Here's a question for you Darryl - do you think the front tie bar will interfere with a ST front sway bar since the ST is an add-on "under" bar? That upgrade's on my radar scope sometime soon.
Here's a question for you Darryl - do you think the front tie bar will interfere with a ST front sway bar since the ST is an add-on "under" bar? That upgrade's on my radar scope sometime soon.
June-4th-2003, 10:27 PM
#12
Registered User
Thread Starter
Join Date: Sep 2001
Location: Huntington Beach, CA Uhhh Surfs up Dude
Posts: 2,367
Originally posted by Davard
There's no conflict between the two parts. I've had them both since Darryl's first group buy last year.
There's no conflict between the two parts. I've had them both since Darryl's first group buy last year.
June-5th-2003, 10:46 AM
#14
Registered User
Thread Starter
Join Date: Sep 2001
Location: Huntington Beach, CA Uhhh Surfs up Dude
Posts: 2,367
I'll do what i can do help with shipping and customs costs for our Canadian and overseas members.
The powder coating is merely a guess at this point ($25 per set) but that could change. I am dropping off the bars to the shop tonight so they can make the tooling and templates for the run off. I'll really only know exact costs when i know how many bars are to be powder coated.
I also may require 50% of the cost as a down payment to get things made, as i requre to give the shop a 50% payment to start. I just can't afford to pay upfront for (an estimated) 40 bars...
new list
5 + 1 maybe
Protoss (1 TB kit)
Beachnut - Scott (1 TB kit + 1 ST bar)
Jordan (1 TB kit)
Zenilder - Bryan (front TB)
Happydog2 (front ??)
? Bizob - Bob (1 TB kit)
Happydog2, is that a front tie bar or front strut bar?
The powder coating is merely a guess at this point ($25 per set) but that could change. I am dropping off the bars to the shop tonight so they can make the tooling and templates for the run off. I'll really only know exact costs when i know how many bars are to be powder coated.
I also may require 50% of the cost as a down payment to get things made, as i requre to give the shop a 50% payment to start. I just can't afford to pay upfront for (an estimated) 40 bars...
new list
5 + 1 maybe
Protoss (1 TB kit)
Beachnut - Scott (1 TB kit + 1 ST bar)
Jordan (1 TB kit)
Zenilder - Bryan (front TB)
Happydog2 (front ??)
? Bizob - Bob (1 TB kit)
Happydog2, is that a front tie bar or front strut bar?
June-9th-2003, 02:42 AM
#15
Registered User
Join Date: Feb 2003
Location: Wisconsin-15 min north of Madison
Posts: 102
Hey darryl.... Im down for another set beyond the rear i just picked up for you......
My brother saw the front one from your last sale and....
Well to say....hes also fond of your work....
He'll be looking for a set sometime quick...
Let me know if this is able to be done...I'll correlate with him then to get somekind of payment goin'
BPT323
My brother saw the front one from your last sale and....
Well to say....hes also fond of your work....
He'll be looking for a set sometime quick...
Let me know if this is able to be done...I'll correlate with him then to get somekind of payment goin'
BPT323