Installing aftermarket HU with Mazda pocket
#1
Installing aftermarket HU with Mazda pocket
Hi Guys,
I've got a new HU and the Mazda din pocket. Aside from the wiring is this all I need?
I've done a test fit and it is ok, it doesn't seem overly stable and there are a couple of gaps I'm not terribly pleased with.
Does anyone have any tips for installing a new HU with a Mazda pocket in a P5? Is there anyway to use the mounting brackets from the stock HU? Should I also use a kit?
Thanks in advance!
Jay
I've got a new HU and the Mazda din pocket. Aside from the wiring is this all I need?
I've done a test fit and it is ok, it doesn't seem overly stable and there are a couple of gaps I'm not terribly pleased with.
Does anyone have any tips for installing a new HU with a Mazda pocket in a P5? Is there anyway to use the mounting brackets from the stock HU? Should I also use a kit?
Thanks in advance!
Jay
#2
Originally posted by blue LEDz
use the metal pocket with the after market HU. also, put electrical tape on the edge of the metal basket between the HU and the pocket. if there is a gap, you can see the metal. so covering it with a strip of electrical tape makes it look a lot better also, if it doesn't fit perfect, a little bit of foam insulation strips can help. put it on the pocket between it and the HU. i don't know how the factory pockets fit, but with other pockets, the padding is almost always needed. but all you really need is the HU, pocket, and wiring harness.
use the metal pocket with the after market HU. also, put electrical tape on the edge of the metal basket between the HU and the pocket. if there is a gap, you can see the metal. so covering it with a strip of electrical tape makes it look a lot better also, if it doesn't fit perfect, a little bit of foam insulation strips can help. put it on the pocket between it and the HU. i don't know how the factory pockets fit, but with other pockets, the padding is almost always needed. but all you really need is the HU, pocket, and wiring harness.
Jay
#3
Originally posted by blue LEDz
best buy and circuit city tell people with new pro's to take it somewhere else how hard is it to install a pocket? lazy bastards and i know they can get the pockets. the brands they carry have them. but you should be set. check the fit of the pocket and HU together. that will determine if you need the foam insulation.
best buy and circuit city tell people with new pro's to take it somewhere else how hard is it to install a pocket? lazy bastards and i know they can get the pockets. the brands they carry have them. but you should be set. check the fit of the pocket and HU together. that will determine if you need the foam insulation.
You say foam insulation, maybe I'm sleepy but what exactly do you mean (what is a common use for it)? Where do you put the insulation? Between the HU and the pocket?
Example: (excuse my uber asci skills)
-top-
<HU>
<foam insulation>
<POCKET>
-bottom-
Don't want to be a pain, but I've got very little experience installing a din HU. All the information I've got from here and around the net seems to assume you know exactly what to do with the din cage that comes with the deck.
Again thanks for the help.
Jay
#4
Originally posted by blue LEDz
you can get the insulation at a hardware store. weather stripping is what it's called. a roll is like $2. it's designed to go at the bottom of windows, to seal them better. it's black insulation. just tell them you need some foam strip insulation. you'll have to guess the thickness you need. remember, if you get too thin, you can add another strip. if you get too thick, you're S.O.L. yeah, put it between the HU and pocket. your diagram is what is needed. the insulation has a sticky side. put the sticky side on the pocket. and with the metal basket, bend as many tabs down as you can. it will help to make the HU more secure.
you can get the insulation at a hardware store. weather stripping is what it's called. a roll is like $2. it's designed to go at the bottom of windows, to seal them better. it's black insulation. just tell them you need some foam strip insulation. you'll have to guess the thickness you need. remember, if you get too thin, you can add another strip. if you get too thick, you're S.O.L. yeah, put it between the HU and pocket. your diagram is what is needed. the insulation has a sticky side. put the sticky side on the pocket. and with the metal basket, bend as many tabs down as you can. it will help to make the HU more secure.
The other thing I did was to take the rubber peg off the stock HU, modify it a little to fit my new HU. This gives the new HU a lot of support from behind. I should have taken pictures of the procedure...well I am going to be changing the pocket out in the near future, so I'll take pictures of everything then.
Thanks for your help!
Jay
Thread
Thread Starter
Forum
Replies
Last Post
eps880
Exterior/Interior/Audio
0
August-10th-2009 10:51 AM
MackDadam
Exterior/Interior/Audio
3
March-30th-2003 11:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)