Does anyone know how to remove the lens housing?...do I have to remove the front bumber for this?....I wanna paint the inside black....any info would be greatly appreciated

 

First, what make and model? For 2nd gen Pro, you have to first remove turn signal. There is one screw to remove, and the signal should slide out. Unplug the signal. Then, you have to take a plastic cover right on top of the grill (under the hood). After the you have done that, remove the grill. You will need a straight edge screw driver, and there are 4 (four) clips, 2 (two) on each side. Slightly undo all four, and the grill should slide away. Then, all you need is to unscrew 4 (four) bolts that hold the headlamp housing in place. Unplug the wires, and you good to play with your headlamp. I hope this helped.

 

this is for the 02 P5...

 

are you talking about the top grill or bottom grill?

 

Oh, sorry. I should have looked at your nickname first. But for those who have 97-98 2nd gen Pro, that is the guide on how to take your headlights off.