How to change fog light bulb in Protege 5?
#1
How to change fog light bulb in Protege 5?
Hi all,
Do I need to remove the headlight(the whole assembly) in order to access to the fog light housing? I can't remove the fog light from underneath the car. Pleas help. Thanks.
Andy
Do I need to remove the headlight(the whole assembly) in order to access to the fog light housing? I can't remove the fog light from underneath the car. Pleas help. Thanks.
Andy
#2
Alright, here's what ya' do.
Remove three philips head screws along the lower splash sheild, and fold it down out of the way. Look up through the hole and you should see a nut holding the foglight assembly in, I think it's a 12 or 14mm. Be sure to hold it because you don't want to scratch the bumper when it drops as you loosen the nut. Now for the hard part, The connector is a bitch, , a flashlight comes in handy here. Just be carefull not to pull the wires out.
Remove three philips head screws along the lower splash sheild, and fold it down out of the way. Look up through the hole and you should see a nut holding the foglight assembly in, I think it's a 12 or 14mm. Be sure to hold it because you don't want to scratch the bumper when it drops as you loosen the nut. Now for the hard part, The connector is a bitch, , a flashlight comes in handy here. Just be carefull not to pull the wires out.
Thread
Thread Starter
Forum
Replies
Last Post
superfarlow
1st Gen Protege/323/GLC
2
September-18th-2004 05:25 PM
Zirguy
How-To's
2
October-4th-2003 12:24 AM
DXDandy
1st Gen Protege/323/GLC
4
September-11th-2002 02:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)