dynamat alternative
#1
dynamat alternative
i ran across a product called Fatmat claiming to be a more resonable alternative to dynamat. Has anyone heard or used this product? their products are priced 1/4 the cost of the competition.
100 sqr. ft for $125 with shipping includes utility knife and roller
100 sqr. ft for $125 with shipping includes utility knife and roller
#2
there are actually many alternative to overpriced Dynamat.
Here is another one..eDead, it is what I used.
http://edesignaudio.com/ep/edead.htm
Here is another one..eDead, it is what I used.
http://edesignaudio.com/ep/edead.htm
#3
I have used B-Quiet Brownbread (http://www.b-quiet.com/) in my car and I'm very satisfied, but according to this discussion (http://www.canadiancaraudio.com/cgi/...=006013#000000), it seems that Fatmat is as good and cheaper. I'm not a specialist at all, but just make sure about its thickness and 'stickyness' (sorry if it's not the good english word...)
#7
Originally posted by KpaBap
I used some stuff my audio shop recomended. It's called V2, I think it was something liek $20 / 20 sqft.
It's really thin, like 2mm thin but worked pretty well.
I used some stuff my audio shop recomended. It's called V2, I think it was something liek $20 / 20 sqft.
It's really thin, like 2mm thin but worked pretty well.
From edead'sebsite:
V.2 Overview - 60mils :
Our V.2 is our thicker deadening solution. eDead V.2 features more mass for more weight where it matters. eDead V.2 also features a extremely adhesive backing just like V.1. V.2 features a backing designed to be more porous and offer extreme bondability between layers. All of this is what makes eDead v.2 a great option for where mass is needed. We recommend the V.2 installation for use in doors, and flooring. Not for installation in direct sunlight
Thread
Thread Starter
Forum
Replies
Last Post
kenchan
3rd gen Suspension/Brakes
6
September-21st-2003 04:59 PM
Intruder
Exterior/Interior/Audio
34
July-3rd-2003 12:34 AM
zenilder
Exterior/Interior/Audio
5
April-24th-2002 11:12 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)