pr5owner

list your dream system here!

i drive a pro5 so i will choose speakers that will fit the factory locations


HU:Pyramid CDR49DX Electronic Tune AM/FM - MPX CD Player ($60)

FS:Pyramid 5780G 5X7 120 Watt 3 Way Speaker ($15)

RS:Pyramid 660G 6.5 Inch 200 Watt 3 Way Speaker ($12)

Sub:Dual Pyramid W123 12 INCH POLY COATED WOOFER 150W ($17x2 = $24)

SPKAmp:Pyramid PB442 4 X 75 Watt Reno Amplifier ($35)

SubAMP:Pyramid PB449X 1000 Watt 2 Channel Amplifier ($65)


Around $250 (tax,S/H,etc) this $250 you spend would probably end up being worse than stock
________
Washington Medical Marijuana

nsxdemon

yea i was about to say...my friend bought some Pyramid components because he was on a real tight budget and I was like "you call this an upgrade?? I think you paid money for crappier components!"

So i dunno if you want us to post our ideal setup or something (I'm guessing money's no problem), so here's mine:


Speakers:
Infinity Kappa 572.5 5x7" 2-way fronts ($170 per pair)
Infinity Kappa 63.5 6.5" 3-way rears ($220 per pair)

Subs:
2 x JL Audio 13" W7 subs (no idea about price but pretty expensive)
These will require quite a bit of work on the body so that the car doesn't BREAK!!

Amps:
JL Audio 300/4 for front/rear speakers ($450 or so)
Rockford Fosgate Power 1500dbd for subs ($1000 or so)

So yea I'm a big Infinity and JL Audio fan. And maybe this setup'll cost somewhere around $3000+ (well over the $250 from the first setup) but at least it'll be an upgrade over the stock stereo!

I'm sure you guys have noticed that I haven't changed the headunit...well I kinda like seeing the whole stock thing and if I can wire the amps from the HU then I'll leave it as is. Just make sure it's the in-dash changer and it's all good. Just to keep the stock look for everyone in the car I'd try to stuff the amps underneath the driver's and passenger's seats (hopefully heat not being TOO much of an issue, but hey, it's not like I'm gonna even ATTEMPT this setup so who cares right??!!). Subs in a nice enclosure in the back.

Well that's my setup that would be awesome if I wouldn't have to pay for, but alas, this is life and nothing's free when you're not living at home with mommy and daddy.
nsx

pr5owner

haha yeah funny or serious setups.. doesn't matter
________
TEEN VIDEOS

ZZOOOMM

I have been in the stereo industry for 15 years and you would be suprised how many of these systems are out there. 700 WATTS of distorted power for $100.00 at the swap meet. 700 WATTS refers to the designation of (WLS) not (SPL) 700 WATTS (WHEN LIGHTNING STRIKES)!!!!!!!

onehawaiian

in my ford forty-nine:
hu- blaupunkt
midrange- audio development
subs- beyond audio
amps- sinfoni
indash media- sony 7" widescreen
multimedia- iconTV

in my rx-8:
hu- blaupunkt
midrange- focal utopia
subs- focal utopia
amps- brax
multimedia- none

in my mazda6:
hu- ummm, blaupunkt?
midrange- massive
subs- autotek
amps- autotek
multimedia- sony

in my current protege5:
hu- blaupunkt
midrange- fusion jonah lomu
subs- fusion jonah lomu
amps- fusion
multimedia- iconTV

damn, now those are dream systems!!!

Aaron

audiovox HU
audiovox coaxils
audiovox amp
audiovox sub
custom cardboard enclosure

talon4x4

I'd like to know what people think of this system I'm about to purchase. Pro's, Con's, whatever I just would like some advice. Do you think this will work in my Protege5.


Head unit - Its an older Alpine from my last car only 2 preouts (the reason I say only 2 preouts, it is to justify the reason I'm not going to get a 4-channel amp to run the 2 front and rear channels. I'm going to run the front preout to the MRV-T320 and the rear/sub preout to the MRD-M300)

Upfront - Infinity REF505CS 5 1/4" Component System

Rear -Sony XS-V1632 6 1/2" 3-Way Speakers (Only thing I could find that would have a chance at fitting) If someone knows of another speaker that doesn't require more than 1 11/16" mounting depth let me know!

Sub - (1) JL Audio 12W3-D2 in a ported box

Sub amp - Alpine MRD-M300 V12 AccuClass-D Mono Power Amp

Amp for the rest - Alpine MRV-T320 2/1 Channel Power Amplifier

BTW: This whole thing is gonna cost around $850 (installed by me), good price or no??

onehawaiian

you should get a little more than 2inches for the rear speakers. my fusion 6.5's come in at a little over 2" and they fit fine. mazda says they rear mounting depth is 2", but you can go a bit over that. i'd suggest grabbing a pair of infinity ref 6.5's.

what's the rms on that 12w3? somwhere around 350 or so? looks like you're wanting the most out of your jl! system looks pretty good tho.

price looks about right as well.

onehawaiian

dude, thump! is really not that bad. it's ma audio's entry level line, and even tho it has a funky name and swap meet look, it has decent sound...

but i wouldn't run it. y'know, i'm just saying... um, nevermind.

onehawaiian

hehe, i wasn't saying thump! was good, just that they are not that bad. decent stuff for ppl on a tight tight tight budget.

but i wouldn't run it. y'know, i'm just saying...

kansei

sony deck(don't remember model)
sound stream spl60 components @2ohm
fosgate 150.2 running components
2 10in sound stream USA dvc subs sealed 1.1 cubic ft. each
sound stream rubi 502 running subs
stock rears off deck

Dave Cameron

NIghtmare systems-
Kraco- Walmart's best
Mustang- Fleamarket special

Dream System

Premier DEX P9 Headunit
Premier DEQ P9 Processor
Premier CDX PD6 In Dash Changer
(3) Brax X1000 Two Channel Amp, 100x2
(1) Brax X2000 Two Channel Amp, 200x2 or 550x1
(6) Brax IPC 2. Caps
(2) Brax Multicontrollers
Focal 165W3 Utopia Three Way Front speaker set- to be tri amped
Focal 33WX Utopia 13 Inch Subwoofer driven by bridged X2000

Ah- the simple life!!

hihoslva

I think I'd like to install the original factory HU from my 79 camaro in my Pro:

AM/FM with CB - yes, that's right - car came with a CB radio - no tape, no 8-track - no nothing. Just AM, FM, and truckers to keep you entertained.

And it was made by AC Delco

Yeah - that thing lasted about a week in that car.......

~HH

onehawaiian

onehawaiian likes your taste in systems...

Wheels_SD

I haven't looked at the specs yet, but it looks like the front speakers in a P5 are 5x7. Is this true? Is it easy to install 6.5" speakers in the front (i.e., any kits that can make it fit easily)? I already have a brand new pair of RF separates that I was hoping to install there. I suppose I can put them in the rear, and get some 5x7s for the front. Does anybody have suggestions about the tweeters that are up by the side mirrors? Should they be upgraded? Are there any 5x7" separates that you would recommend?

This is what I currently have, that I bought to put in my old car. Now that I have a new P5, I'm not planning on using thes components in my old car.

Kenwood KDCMP919 MP3/CD player
6.5" RF separates
6x9" RF 3way --The 6X9's I unfortunately won't be using in my P5, I don't want to cut anything.
10" RF Punch HX2 sub
4x50 watt Kenwood amp
1x360 watt RF punch amp

My only question is about the front speakers and their size.