Squeaking noise

Thread Tools
 
Search this Thread
 
Old Aug 7, 2002 | 04:50 AM
  #1  
JDMstuff's Avatar
Thread Starter
OWNZ A P5
 
Joined: Jul 2002
Posts: 477
From: Ca
JDMstuff is on a distinguished road
Squeaking noise

After having my car lowered on Eibachs for about 2 weeks, I started noticing a squeaking noise coming from the right rear of the hatch area. I did the lowering myself, and made sure to put everything back the way it was, but it now sounds like there are a couple of chipmunks in my hatch. Do any of you know of a fix for this?
Old Aug 7, 2002 | 08:44 PM
  #2  
pantherES's Avatar
Registered User
 
Joined: Mar 2002
Posts: 298
From: West Michigan
pantherES is on a distinguished road
Have you to see if your struts are lose? Same thing happened with my Civic, tightened the struts back up, problem solved.
Old Aug 8, 2002 | 11:06 PM
  #3  
JDMstuff's Avatar
Thread Starter
OWNZ A P5
 
Joined: Jul 2002
Posts: 477
From: Ca
JDMstuff is on a distinguished road
The struts seem fine, but the upper retaining nut may have come loose. I'll have to check it again, but I didn't feel like tearing apart the interior again.
Old Aug 11, 2002 | 12:38 PM
  #4  
obender66's Avatar
Registered User
 
Joined: Sep 2001
Posts: 401
From: Toronto
obender66 is on a distinguished road
Are you sure you didn't forget to put back thin film of plastic which goes between strut and body?
In any case, I would tighten mounting bolts.
Alex
Old Aug 11, 2002 | 03:02 PM
  #5  
Ambient's Avatar
Boost!
 
Joined: Sep 2001
Posts: 508
From: Hampton, VA
Ambient is on a distinguished road
Originally posted by obender66
Are you sure you didn't forget to put back thin film of plastic which goes between strut and body?
This is most likely exactly what is going on. I didn't replace it in my right front strut. Azrakain can vouch for the chipmunks in my suspension.
Old Aug 11, 2002 | 08:07 PM
  #6  
JDMstuff's Avatar
Thread Starter
OWNZ A P5
 
Joined: Jul 2002
Posts: 477
From: Ca
JDMstuff is on a distinguished road
You know, I remember that I didn't install that piece back on the shock. I didn't think that thin piece of plastic made a difference. They're on the other 3, but I figured it was too thin to make a difference anyway. I hope I can find it. If I can't I'll just go down to the dealer and ask for the chipmunk silencer pad.
Old Aug 14, 2002 | 12:20 AM
  #7  
JDMstuff's Avatar
Thread Starter
OWNZ A P5
 
Joined: Jul 2002
Posts: 477
From: Ca
JDMstuff is on a distinguished road
Put the thin film piece back on today, but it didn't help. Anyone else have an idea?
Old Aug 23, 2002 | 03:11 PM
  #8  
ibluevirus's Avatar
Registered User
 
Joined: Aug 2002
Posts: 85
From: San Jose
ibluevirus is on a distinguished road
take a passenger or have someone else drive the car with you in the back and interior out and listen for the exact spot
Old Aug 24, 2002 | 06:01 PM
  #9  
Patio's Avatar
got boost? HELL NO!!!!!
 
Joined: Jun 2002
Posts: 385
From: Houston, TX <):)
Patio is on a distinguished road
put some rat poison in the fender well

or WD40 the whole thing?
Old Aug 26, 2002 | 02:29 AM
  #10  
JDMstuff's Avatar
Thread Starter
OWNZ A P5
 
Joined: Jul 2002
Posts: 477
From: Ca
JDMstuff is on a distinguished road
I found out that it's the retaining nut on the top of the shaft that's causing the problem. I must have stripped it when I put it back on and won't tighten properly. Thanks for all your help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pocketrocket
1st gen/323/GLC Suspension and Brakes
4
Oct 28, 2012 05:48 AM
taps
Mazda3/Mazdaspeed3
0
Jul 10, 2011 10:54 PM
ninja
2nd Gen Protege
4
Dec 6, 2003 09:56 PM
protegeFive
3rd Gen Protege/MazdaSpeed/P5/MP3
8
Sep 26, 2003 02:55 AM
celticbass
3rd gen Suspension/Brakes
4
May 6, 2003 12:43 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:05 AM.