3rd Gen Protege/MazdaSpeed/P5/MP3 General/Maintenance Discussion for 1999-2003.5 Models Only (BJ Chassis)

Clicking at shutdown???

Old Aug 7, 2002 | 10:18 PM
  #1  
TexP5's Avatar
Thread Starter
Protege Enthusiast
 
Joined: Jul 2002
Posts: 88
From: Houston
TexP5 is on a distinguished road
Clicking at shutdown???

Folks i need some help. I did a search AND read the FAQ. Already don't tell me that OK. But if there's a thread I missed and you can point me there, super.

I installed an Injen and a Racing Beat exhaust on Monday. Car's running great but when I shut it off I'm getting this loud "Clicking" noise. It clicks about every 30 seconds and it continues for several minutes and then stops by itself.

What the hell is it? What did I do wrong here? I'm assuming I goofed somewhere cause it wasn't doing this before.

All help appreciated
Old Aug 7, 2002 | 10:51 PM
  #2  
Robdoggz's Avatar
Protege Enthusiast
 
Joined: Feb 2002
Posts: 93
From: North, CA
Robdoggz is on a distinguished road
its most likely just the metal cooling down as it gets very hot it expands and the clicking noise is the metal contracting as it cools down most cars do that but arent that loud maybe the new muffler you put on is bigger and makes more noise i also think the catalytic converter makes the same noise. hope this helps you out.
Old Aug 7, 2002 | 10:58 PM
  #3  
proman's Avatar
Registered User
 
Joined: Apr 2002
Posts: 336
From: Buffalo NY
proman is on a distinguished road
yup it's the metal or what you could be hearing is the oil dripping after your car is turned off
Old Aug 7, 2002 | 11:06 PM
  #4  
kc5zom's Avatar
Certified Sick Individual
 
Joined: Mar 2002
Posts: 1,141
From: Houston, TX.
kc5zom is on a distinguished road
I would say it was the metal and probably not the CONDENSATION falling under your car. If you are dripping oil then you have more serious problems to worry about.
Old Aug 7, 2002 | 11:19 PM
  #5  
TexP5's Avatar
Thread Starter
Protege Enthusiast
 
Joined: Jul 2002
Posts: 88
From: Houston
TexP5 is on a distinguished road
Hmmm...I appreciate the ideas, but this sounds a lot more regular than a contraction of metal would be? It happens with consitency, it's not like a crack, then two or three, then nothing, then another...

It's Crack...crack...crack... Sound like something trying to start or tunrover. What about the solenoid purge valve that you move when installing a CAI?? But if that's the case why doesn't everyone report this noise??
Old Aug 8, 2002 | 03:26 AM
  #6  
JDMstuff's Avatar
OWNZ A P5
 
Joined: Jul 2002
Posts: 477
From: Ca
JDMstuff is on a distinguished road
It's the element inside the cat that's are making the sound. It's normal, and there's nothing to worry about.
Old Aug 8, 2002 | 09:37 AM
  #7  
TexP5's Avatar
Thread Starter
Protege Enthusiast
 
Joined: Jul 2002
Posts: 88
From: Houston
TexP5 is on a distinguished road
JDM, thanks. If that's the case, well why hasn't it been happening since day one?
Old Aug 8, 2002 | 09:49 AM
  #8  
02p5's Avatar
Protege Enthusiast
 
Joined: Jan 2002
Posts: 91
From: Vancouver
02p5 is on a distinguished road
Must be your first stainless exhaust huh?
True Stainless steel exhaust's make that noise when cooling down. I have the exact RB cat back exhaust and it does the exact same thing. It's normal.
Old Aug 8, 2002 | 09:53 AM
  #9  
TexP5's Avatar
Thread Starter
Protege Enthusiast
 
Joined: Jul 2002
Posts: 88
From: Houston
TexP5 is on a distinguished road
Man...I've asked a few people off the baord about this. Some of whom have ss exhausts and their cars don't do this?? It is my first SS exhuast and I'm not arguing with you that it might be normal, but I guess that's my whole point. If it is normal, cool, but why does it happen? If it's not normal then of course I gotta figure it our and fix it.

Why does the RB exhaust do this? What's causing the sound?
Old Aug 8, 2002 | 10:33 AM
  #10  
proman's Avatar
Registered User
 
Joined: Apr 2002
Posts: 336
From: Buffalo NY
proman is on a distinguished road
Originally posted by kc5zom
I would say it was the metal and probably not the CONDENSATION falling under your car. If you are dripping oil then you have more serious problems to worry about.
yes if you were dripping oil then that would be a worse problem. what i meant was the oil dripping into the pan again which some friend's dad told me. but the metal sounds like a better reason.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Douglas3E8
3rd Gen Protege/MazdaSpeed/P5/MP3
1
Jun 30, 2008 12:14 PM
utdbear
1st Gen Protege/323/GLC
11
Jul 23, 2003 05:07 PM
blueflame
3rd Gen Protege/MazdaSpeed/P5/MP3
1
Mar 8, 2003 09:55 AM
LOS-323
3rd gen Engine/Drivetrain
3
Jan 22, 2003 10:20 AM
semtex
1st gen/323/GLC Suspension and Brakes
9
Oct 7, 2002 05:10 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:14 AM.