babyman1737

I'm trying to finally solve this: I'm trying to find out everything about protege injectors so we can finally find some bigger ones out there.
FIRST: what are the sizes?
2.0: 220cc
1.8: ?
1.6: ?

Also: are they saturated? what other info is needed?

zerocover

http://web2.airmail.net/theman/protegefaq/
^^protege faq

In mazda 3
2.3: 260cc
2.0: 220cc

protege
2.0 t: 285cc
2.0: 285cc
1.8: 235cc
1.6: 155cc

Roddimus Prime

very nice info Zero.

babyman1737

first, i feel stupid, thanks zero. anyway so let's say for example a 1.6l user wants to turbo their car. speaking injector wise, with say a T-25, getting 2.0l injectors would be a good swap. is it direct?

zerocover

Were having alot of problems with the 1.6l injectors.
No one knows what would be a direct fit. Few people have turboed and I think only wagner has ever run more then the stock injectors (wasent bikman running a race protege), problem is he is a tough man to get in toutch with.

We have one guy that is trying to run some serious power what hes doin is getting some 3000gt injectors and a custom fuel rail.
Most of the turbo 1.6l just run 6psi so there is no need for bigger injectors.

babyman1737

so no other injectors EVER have been found to fit in the 1.6l? I use to be a DSMer and we had so many interchangeable injectors! Also, do the turbo 2.0l exhaust manifolds fit on the 1.6l?

zerocover

The thing is no one has tried, to match a diffrent injector. I bet there are plenty that will fit. Rumor has it that the bp parts will fit I really dont know.

No engine parts from the 2.0 will fit the 1.6. If your looking for an exhaust manifold just about the only place where you can get an exhaust manifold is from wagnermotorspots.net you need to e-mail him for one, its $500 for the manifold and downpipe.

We are looking for other places though. Just getting one custom made seems to be the way to go.

neerajg

i live really close to Dave aka biknman, i know that him and his mechanic used injectors from a gs-t eclipse and they worked just fine, he just had to make the wiring harness for them.

THEGOLDPRO

yeah thats me, lol, no one seems to know if their are direct replacement injectors, im sure their are *** loads of injectors that will fit, i was gonna try some 3000gt injectors, but they are like 330cc injectors, and i think that will just mess stuff up.

centsless

does anyone know if the Mazda3 Injectors with 260 cc, would be a direct fit to a 02 MP5 with 220CC. ??
also, for a 40 CC change, is it required that you have to change the fuel pump.

Roddimus Prime

not recommended, your car will run like ***. it'll squirt that extra 40cc/minute into the motor that already runs rich as hell. Unless you're running forced induction with stand alone fuel management your best bet is to stick to stock fuel system. I've seen stock injected p5's hit 260whp.

gcs118

What are saturated injectors?