looking for VCH
July-1st-2003, 04:20 PM
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Colombia, South America
Posts: 45
looking for VCH
I have seen in some of your cars you disconect the hose (not PCV valve hose) that goes from the valve cover to the intake rubber hose (big one) an put a little filters on each ends. What are you looking for with that mod? does it really works? and if so, where can i get those filters?
Thanks in advance
UHZT
___________________________
Silver Y2K Allegro (Protege) 1.6L:
K&N drop in filter
Custom side sills kit
Hiper ground wiring
Bosch anti fog lights
900 Watts audio power
Thanks in advance
UHZT
___________________________
Silver Y2K Allegro (Protege) 1.6L:
K&N drop in filter
Custom side sills kit
Hiper ground wiring
Bosch anti fog lights
900 Watts audio power
July-1st-2003, 04:54 PM
#2
Master of All Things :{D
Join Date: Feb 2002
Location: southeast texas, near houston
Posts: 4,118
it actually does NOTHING.....and in MY opinion you are better off keeping your valve cover vented to the intake. if you just put that little filter on it...sure it will vent the valve cover so that no positive pressure can build up...but eventually it will become oil soaked and start dripping on your engine.....
personally....i would prefer that a tiny bit of oil mist gets sucked into the intake and into the engine and burnt.
:{D
personally....i would prefer that a tiny bit of oil mist gets sucked into the intake and into the engine and burnt.
:{D