3rd gen Engine/Drivetrain Engine/Drivetrain Modification Discussions for 1999-2003 Models Only (BJ chassis)

Grinding Second

Thread Tools
 
Search this Thread
 
Old January-16th-2003, 06:14 PM
  #1  
Hoosier daddy?
Thread Starter
 
kcbhiw's Avatar
 
Join Date: Sep 2002
Location: Atlanta, GA
Posts: 563
kcbhiw is on a distinguished road
Grinding Second

Just a hair over 5000 miles and my transmission is acting up. The problem is intermittant. Every now and then when shifting to second, either up or down, I can't get the shifter to go into second. I'm not about to force it, so I let it fall back t neutral and try second again. I'll repeat this until it goes. Several times now, with the clutch to the floor, it will sometimes grind as it goes in. What's the problem here? Synchros? I'm a bit perturbed that this is happening to a brand new car. I'll be taking it in come Monday, but I was just wondering if anyone had suggestions.
kcbhiw is offline  
Old January-16th-2003, 11:39 PM
  #2  
Protege Enthusiast
 
Carlos's Avatar
 
Join Date: Mar 2002
Posts: 88
Carlos is on a distinguished road
I would say to take it in and let the dealer know about it. I don't think you're alone on this one, but maybe yours is bit more serious than others around here. Mine occassionally grinds slightly going into second, and is hesitant to go into 2nd usually only when cold. For me anyway, it hasn't refused to go into gear if I give it enough time.

Please let us know what your dealer says about this.
Carlos is offline  
Old January-16th-2003, 11:39 PM
  #3  
Registered User
 
carguycw's Avatar
 
Join Date: Jan 2002
Location: Dallas, Texas
Posts: 1,122
carguycw is on a distinguished road
Does it seem to be related to temperature?

Mazda trannies (both FWD and RWD) have a reputation for being stubborn when they're cold, so this sort of problem often arises in the winter. Redline tranny fluid helps a LOT.
carguycw is offline  
Old January-17th-2003, 02:35 AM
  #4  
Protege Newbie
 
01ProES's Avatar
 
Join Date: Jan 2003
Posts: 41
01ProES is on a distinguished road
Re: Grinding Second

Originally posted by kcbhiw
Just a hair over 5000 miles and my transmission is acting up. The problem is intermittant. Every now and then when shifting to second, either up or down, I can't get the shifter to go into second. I'm not about to force it, so I let it fall back t neutral and try second again. I'll repeat this until it goes. Several times now, with the clutch to the floor, it will sometimes grind as it goes in. What's the problem here? Synchros? I'm a bit perturbed that this is happening to a brand new car. I'll be taking it in come Monday, but I was just wondering if anyone had suggestions.
Yes, just take it to the dealer, let them do the worK!!

01ProES is offline  
Old January-17th-2003, 06:18 PM
  #5  
Hoosier daddy?
Thread Starter
 
kcbhiw's Avatar
 
Join Date: Sep 2002
Location: Atlanta, GA
Posts: 563
kcbhiw is on a distinguished road
Does it seem to be related to temperature?
Come to think of it, it seems like it may only happen within the first few miles after starting, but I haven't paid that much attention to it.

I do plan on taking it to the dealer eventually, but like i said it's very intermittant, and as soon as i take it to them, all the problems will dissappear. I haven't had any problems with it yet today.

Thanks for all of the responses, guys.
kcbhiw is offline  
Old January-18th-2003, 01:30 AM
  #6  
Use this to install stuff
 
Installshield's Avatar
 
Join Date: Mar 2002
Location: State College, PA
Posts: 1,069
Installshield is on a distinguished road
Its probably just the common grind when cold. I have never owned a FWD car that didn't do this in the winter when just started. The problem I guess is all of the gear oil settles to the bottom of the box and is a little thicker when cold. The start up in nuetral doesn't allow enough of it to coat everything before you start moving and the shift to second is fairly notchy and sometimes makes a little grinding noise/hard to shift. If it really worries you take it to your dealer, but I will bet they will tell you that it is just do to cold weather and that it is normal.
Installshield is offline  
Old January-18th-2003, 02:46 AM
  #7  
Registered User
 
nightowl's Avatar
 
Join Date: Oct 2001
Location: ottawa, ontario canada
Posts: 1,030
nightowl is on a distinguished road
ya i got the same problem, but only after the first 10 min of driving the car (and its been -20 degrees C for a few days now too
nightowl is offline  
Old January-18th-2003, 09:50 AM
  #8  
Protege Enthusiast
 
Rwt1's Avatar
 
Join Date: Jan 2003
Location: Connecticut
Posts: 50
Rwt1 is on a distinguished road
I have this issue with my car...800 mi on it. I took it to the dealer already, but by the time I got there everything was warm enough where it wouldn't do it. So they kept it for the day and say when they drove it later on they felt it. As other people have said, they said its a common thing when the car is cold and there is nothing to do about it. They did say IF there was something wrong, and they didn't think there was, it would be the synchro. But, in their opinion, synchro are usually either good or bad...not just a little messed up.
Rwt1 is offline  
Old January-21st-2003, 03:49 PM
  #9  
Registered User
 
ibluevirus's Avatar
 
Join Date: Aug 2002
Location: San Jose
Posts: 85
ibluevirus is on a distinguished road
your synchor could be going bye bye...
ibluevirus is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
amynadler
Mazda3/Mazdaspeed3
3
April-27th-2013 11:55 AM
Derek8588
Mazda3/Mazdaspeed3
4
July-14th-2011 11:26 AM
mike
Mazda3/Mazdaspeed3
5
April-13th-2010 05:16 AM
centsless
3rd gen Engine/Drivetrain
10
April-20th-2005 11:35 AM
nautical2086
3rd gen Engine/Drivetrain
4
June-26th-2004 11:18 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Grinding Second



All times are GMT -5. The time now is 05:23 PM.