thinking about cleaning my injectors before reinstalling motor
#1
Guest
Posts: n/a
thinking about cleaning my injectors before reinstalling motor
I have been considering to try and clean my injectors before I reinstall my motor and driving. , but the problem is, I am wondering how I would go about doing this. I really don't want to send them to R.C.E cause it costs a lot to have them do it .. maybe close to 170 or so with shipping.
I had found this site long time ago that told you what to do and how to hook up the injectors to be cleaned and what to use to clean them . I really would hate for a dirty injector to cause me to lean out a cylnder..
any thoughts guys?
I had found this site long time ago that told you what to do and how to hook up the injectors to be cleaned and what to use to clean them . I really would hate for a dirty injector to cause me to lean out a cylnder..
any thoughts guys?
#2
take som WD-40 to it that and duct tape.. they fix anything
and if you are worried about it ruining a cylinder... then just dont put one there... ya dont need it
Ok i have no idea... wanted to "sound like I knew what I was talking about"
and if you are worried about it ruining a cylinder... then just dont put one there... ya dont need it
Ok i have no idea... wanted to "sound like I knew what I was talking about"
#3
On the East Coast, try Marren Motorsports. They charge $24/per. Add a couple of bucks shipping.
I had mine done at about 150k. One was dripping, not spraying. Flow was still fairly reasonable, but the car stumbled until about 4000rpm. It was worth it. Injector cleaners can only do so much.
BTW, the injectors spec'd out at 245cc/hr afterwards. Before they were between 200-230cc/hr.
I had mine done at about 150k. One was dripping, not spraying. Flow was still fairly reasonable, but the car stumbled until about 4000rpm. It was worth it. Injector cleaners can only do so much.
BTW, the injectors spec'd out at 245cc/hr afterwards. Before they were between 200-230cc/hr.
Last edited by Davard; July-24th-2003 at 04:02 PM.
#4
Guest
Posts: n/a
Originally posted by Davard
On the East Coast, try Marren Motorsports. They charge $24/per. Add a couple of bucks shipping.
I had mine done at about 150k. One was dripping, not spraying. Flow was still fairly reasonable, but the car stumbled until about 4000rpm. It was worth it. Injector cleaners can only do so much.
BTW, the injectors spec'd out at 245cc/hr afterwards. Before they were between 200-230cc/hr.
On the East Coast, try Marren Motorsports. They charge $24/per. Add a couple of bucks shipping.
I had mine done at about 150k. One was dripping, not spraying. Flow was still fairly reasonable, but the car stumbled until about 4000rpm. It was worth it. Injector cleaners can only do so much.
BTW, the injectors spec'd out at 245cc/hr afterwards. Before they were between 200-230cc/hr.
-------------------
on the site you linked me to they had some calculations for figureing out the max hp some injectors could hold.. I did some figureing with estimates and was pretty amazed
Bruce
#5
Originally posted by Bruce95fmla
thank you , oddly enough they are in CT, but it is still better to just ship it to them ... I have to really look and see if I see this site that I ran across a while ago..
-------------------
on the site you linked me to they had some calculations for figureing out the max hp some injectors could hold.. I did some figureing with estimates and was pretty amazed
Bruce
thank you , oddly enough they are in CT, but it is still better to just ship it to them ... I have to really look and see if I see this site that I ran across a while ago..
-------------------
on the site you linked me to they had some calculations for figureing out the max hp some injectors could hold.. I did some figureing with estimates and was pretty amazed
Bruce
My thinking with CT was that instead of 8 days each way UPS ground or USPS, you'd have 2-3. Also costs less.
#6
Guest
Posts: n/a
maybe I should send him my gtr injectors , because I am planning a minimum of 180 hp once boosted..
when I was calculating the factory injectors ability I was pretty much coming up with the same hp number as them ... 160 ish..
gtr injectors were near 300ish or something like that.. I forgot, as I was tired as hell last night
Bruce
when I was calculating the factory injectors ability I was pretty much coming up with the same hp number as them ... 160 ish..
gtr injectors were near 300ish or something like that.. I forgot, as I was tired as hell last night
Bruce
Thread
Thread Starter
Forum
Replies
Last Post
zorlac7
1st gen/323/GLC Engine and Drivetrain
2
October-23rd-2003 11:36 PM
jedwards242000
1st gen/323/GLC Engine and Drivetrain
5
May-24th-2003 07:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)