will a 93 323 front seat fit in a 94 pro dx
#1
will a 93 323 front seat fit in a 94 pro dx
the reason i ask is they make a seat bracket for an 88-93 323 2 WD and i wanted to get racing seats and i was hoping i could use that bracket thanx
#3
http://www.corbeau.com/bracket.shtml#mazda
they make the bracket for the seats do you know if they will fit a 94 pro
they make the bracket for the seats do you know if they will fit a 94 pro
#5
as discussed by funk, the bolt patterns for the 323 do NOT directly match up with the bolt patterns for the 90 to 94 protege. you can see if they have mx-3 seat brackets... they will bolt directly into a 90-94 protege, the only hold up is you might have to level out the seats with longer bolts and washers to shim the height of the seat till it's level... these parts can EASILY be bought at home depot.
peace
peace
#6
AS far as i know the seats, brackets on all mx3's, 323's escorts, and 1st gen proteges are ALL the exact same. so if there are seats for a 323 they will fit in any of those cars. 323 stock seats are uncomfortable, ive found out.
#7
do people just glide through every post and NOT read everything??
http://www.protegeclub.com/forum/sho...5&pagenumber=3
- funkdaddysmack /w a 90 323.
it's like 8 posts down from the top... you can't miss it. so NO, all SEAT BRACKETS are not treated the same. mx-3 seat brackets work in a protege, yes, but apparently not in the 323. the protege seat brackets don't seem to work on mx-3 seats as the design and slant of the seat is slightly different, but bottom line is the 323 and the protege have a different bolt pattern.
peace
http://www.protegeclub.com/forum/sho...5&pagenumber=3
I'm not sure if the 323 has a different pattern on the floor for the seatrails, but the MX-3 seatrails were not even close to bolting up. So I reused my stock seatrails.
it's like 8 posts down from the top... you can't miss it. so NO, all SEAT BRACKETS are not treated the same. mx-3 seat brackets work in a protege, yes, but apparently not in the 323. the protege seat brackets don't seem to work on mx-3 seats as the design and slant of the seat is slightly different, but bottom line is the 323 and the protege have a different bolt pattern.
peace
Thread
Thread Starter
Forum
Replies
Last Post
Crash Test Dummy
Exterior/Interior/Audio
1
December-8th-2012 11:51 PM
bharpiy
Parts For Sale or Wanted
0
September-21st-2004 11:31 PM
FunkRider
Exterior/Interior/Audio
3
May-13th-2002 02:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)