will a 93 323 front seat fit in a 94 pro dx
 

the reason i ask is they make a seat bracket for an 88-93 323 2 WD and i wanted to get racing seats and i was hoping i could use that bracket thanx

who makes a bracket?

http://www.corbeau.com/bracket.shtml#mazda

they make the bracket for the seats do you know if they will fit a 94 pro

should fit, because if you look at the 91-96 escort on there it's the same part number.

as discussed by funk, the bolt patterns for the 323 do NOT directly match up with the bolt patterns for the 90 to 94 protege. you can see if they have mx-3 seat brackets... they will bolt directly into a 90-94 protege, the only hold up is you might have to level out the seats with longer bolts and washers to shim the height of the seat till it's level... these parts can EASILY be bought at home depot.
peace

AS far as i know the seats, brackets on all mx3's, 323's escorts, and 1st gen proteges are ALL the exact same. so if there are seats for a 323 they will fit in any of those cars. 323 stock seats are uncomfortable, ive found out.

do people just glide through every post and NOT read everything??
http://www.protegeclub.com/forum/sho...5&pagenumber=3

- funkdaddysmack /w a 90 323.

it's like 8 posts down from the top... you can't miss it. so NO, all SEAT BRACKETS are not treated the same. mx-3 seat brackets work in a protege, yes, but apparently not in the 323. the protege seat brackets don't seem to work on mx-3 seats as the design and slant of the seat is slightly different, but bottom line is the 323 and the protege have a different bolt pattern.
peace