caliper is rubbing against the disk help
#1
caliper is rubbing against the disk help
I don't know wtf the problem is, I just put new pads on today and took my car for a spin and wow lots of noise and what sounded like grinding sure enough is was the caliper and the disk touching one another, the other side has lots of clearance but for some damn reason this side has almost none ? I'm guessing that somone replaced tha disk for some reason and its just a wee too big. Also the calpier is touching the disk in the center of the caliper between the two pads. Please help ? or advise thanks for the help
#4
Jack it up on one corner, grab a wheel and rock hard. If you get movement back and forth on the wheel and hear a kind of a low clicking or clunking noise, then it's probably a bearing. If you don't, check the rotors. Make sure that you definately got the caliper mounting bolts tight also. If the calipers can move the least bit, they'll rub.
#6
Got it fixed. The dumbass that owned the car before me put a dx caliper brake bracket on the car it has a marking tha says "13" on the lx has a "14" marking on it, so I went to a junk yard and payed 10 bucks now its great again thanks for your help guys you got the wheels in my hed turning.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)