1st gen/323/GLC Engine and Drivetrain Engine/Drivetrain Modification Discussions for 1990-1994 Models (BG chassis) and 1981-1989 GLC/323 Models (BD and BF chassis)

Car won't start!!!

Old Nov 19, 2002 | 06:14 PM
  #1  
Funky Buddha's Avatar
Thread Starter
Wok the Wok
 
Joined: May 2002
Posts: 785
From: Calgary, Canada
Funky Buddha is on a distinguished road
Car won't start!!!

I took my car in to the dealer to get an engine clean(shampoo) and now it won't start. They say it's been narrowed down to the distributor. They've even gone as far as putting a test one in. It works for a couple of min. then it dies again and it won't start after that.

Any suggestions?
Old Nov 21, 2002 | 12:15 PM
  #2  
Funky Buddha's Avatar
Thread Starter
Wok the Wok
 
Joined: May 2002
Posts: 785
From: Calgary, Canada
Funky Buddha is on a distinguished road
Looked through it and there was nothing. The shop said I'm gonna have to get a new distributor. Any other ideas? I mean, this car's never had a stalling history, the thing worked when i drove it to the shop and they drove it into the garage.
Old Nov 27, 2002 | 02:45 PM
  #3  
jeremy's Avatar
Protege Enthusiast
 
Joined: Nov 2002
Posts: 161
From: florida
jeremy is on a distinguished road
if its at a shop.....and you know trust the mechanic ..go with what he says...



my advice would be to get a new cap....make sure all the spark plug wires are plugged in all the way as they may have been knocked around while cleaning...


after that ..i don't know....i believe though that if you take the distibutor cap off and the rotor button...there is a small plate wich connects the wires in the distributor that will cause the car to turn..but not turn over....

but I WOULD GO WITH WHAT THE SHOP SAYS...

ALL THESE PARTS I MENTIONED CAN BE BOUGHT @ AUTOZONE OR WHJATEVER FOR LIKE 3-6 DOLLARS A PIECE.....

later
Old Dec 1, 2002 | 09:45 PM
  #4  
obeytheflag's Avatar
Protege Newbie
 
Joined: Aug 2002
Posts: 41
From: CAL
obeytheflag is on a distinguished road
just a suggesting...you think anything might be wrong with the air flow meter? check that too cuz i had a problem (when installing intake) and the car would not start. hope its nothing major for you
Old Dec 2, 2002 | 01:00 AM
  #5  
Funky Buddha's Avatar
Thread Starter
Wok the Wok
 
Joined: May 2002
Posts: 785
From: Calgary, Canada
Funky Buddha is on a distinguished road
Well..it was the distributor...the shop paid for half. Works fine now..thx guys
Old Dec 8, 2002 | 11:45 AM
  #6  
snart's Avatar
Protege Enthusiast
 
Joined: Nov 2002
Posts: 126
snart is on a distinguished road
this happened to my PGT after I washed it and I eventually (after replacing the damn starter and other various things ) narrowed it down to the battery not having a good connection. So I went and got some of that red goop and put it on the terminals and brushed them, that took care of it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bucket46
3rd Gen Protege/MazdaSpeed/P5/MP3
2
Aug 18, 2015 06:32 AM
AndyP
1st Gen Protege/323/GLC
8
Nov 15, 2011 11:27 AM
indianap5
3rd Gen Protege/MazdaSpeed/P5/MP3
10
Jan 6, 2004 09:27 PM
pysees
1st Gen Protege/323/GLC
5
Oct 2, 2003 08:53 PM
TRD Terror
1st gen/323/GLC Engine and Drivetrain
19
Jun 10, 2003 10:11 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:15 AM.