Some Pics of my car
#1
Some Pics of my car
#5
#8
ToMaC, the clear corners are for a 98 mitsubishi eclipse. I had to cut them apart and make them thinner because they are about a 1/2" thick when you get them. I then used acrylic glue to put the two halves together again and added a bead of silicon to make sure they were water tight. Some of the alignment parts on the back of them had to be removed to. I then had to take a dremel witha cutting bit and notch out a tiny part of the orginal hole for the factory lights in the bumper... It takes a while but you should be happy with the results I know I am.
anonymous_kev, I was getting the leather done at a local shop here in town called autosalon but they just recently went under I found two other shops that will do it their prices are from $750 - $875 thats with black leather and the silver inserts as well as the steering wheel. However they need the car for about a week so I need to plan a good time where I can live without a car... hopefully I will be able to get it done sone so I can show you all.
Mark
anonymous_kev, I was getting the leather done at a local shop here in town called autosalon but they just recently went under I found two other shops that will do it their prices are from $750 - $875 thats with black leather and the silver inserts as well as the steering wheel. However they need the car for about a week so I need to plan a good time where I can live without a car... hopefully I will be able to get it done sone so I can show you all.
Mark
#11
Re: Some Pics of my car
Originally posted by RiceWagon
here are some new pics of my ride enjoy.
Mark
http://photos.yahoo.com/ricewagon25
here are some new pics of my ride enjoy.
Mark
http://photos.yahoo.com/ricewagon25
#13
mnkyboy, The plastic is just a construction grade 4 mil Poly transparent plastic sheet. I cut it to size and tucked it under the trim pieces to protect my carpet from the salt/snow/water in the winter.
Mark
Mark
#14
Originally posted by RiceWagon
mnkyboy, The plastic is just a construction grade 4 mil Poly transparent plastic sheet. I cut it to size and tucked it under the trim pieces to protect my carpet from the salt/snow/water in the winter.Mark
mnkyboy, The plastic is just a construction grade 4 mil Poly transparent plastic sheet. I cut it to size and tucked it under the trim pieces to protect my carpet from the salt/snow/water in the winter.Mark
Thread
Thread Starter
Forum
Replies
Last Post
mnkyboy
Mazda3/Mazdaspeed3
22
December-13th-2003 01:50 PM
jedwards242000
Photo and Video Gallery
12
October-24th-2003 11:25 PM
DarK_anGel1412
Exterior/Interior/Audio
11
March-21st-2003 09:51 AM
vaughnc
General Automotive
2
September-13th-2002 10:28 PM
vaughnc
Mazda Motorsports
1
September-11th-2002 12:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)