Mazda3/Mazdaspeed3 General/Maintenance Discussion of the Mazda3 and MazdaSpeed3

2010 has 5th Gear Grind on High Speed of 80mph above

Old Jun 27, 2009 | 06:41 AM
  #1  
edangs's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
edangs is an unknown quantity at this point
2010 has 5th Gear Grind on High Speed of 80mph above

I have a 2010 Mazda3 Touring with 250miles. I noticed that the 5th gear grinds on high gear.

Heres what happens; going 80mph, i take it out of 5th gear and put it in neutral, wait till the RPM goes back t 1k , I then step on the clutch all the way and shift into 5th gear -this is when i get the grind.

I have had this problem on old cars where the syncros failed, but i find it hard to believe that that is the case on this brand new car.

Anyone other Mazda3 owner experience this problem?

Can you test the same scenario i provided above and post back your finding

Last edited by edangs; Aug 8, 2009 at 05:55 AM.
Old Jun 29, 2009 | 02:31 PM
  #2  
1funride's Avatar
Registered User
 
Joined: Jul 2007
Posts: 84
From: Bay Area, CA
1funride is on a distinguished road
The cars under warranty, why not have the dealership check it out?
Old Jul 4, 2009 | 06:43 PM
  #3  
Brett682's Avatar
Registered User
 
Joined: Jul 2009
Posts: 5
Brett682 is an unknown quantity at this point
Wait, why are you taking it out of gear to even know this in the first place??? Just dont take it outta gear! JK that would bother me too and going to see if mine does that too on my way home tonight... Well not sure I wanna know though. That might drive me crazy...!

Post if you find anything out about that... Curious
Old Aug 1, 2009 | 06:21 PM
  #4  
edangs's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
edangs is an unknown quantity at this point
Manufacturer finally confirmed the problem and will have the dealer replace the 5th gear and synchros replaced.

I would prefer they replace the car as this I only have 650 miles on it.

Anyone know how i can have the dealer / manufacturer replace this car after the repair?
Old Aug 10, 2009 | 06:50 PM
  #5  
edangs's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
edangs is an unknown quantity at this point
Dealer finally finished the replacement of the 5th gear and synchros and guess what...... problem is still there.

dealer is awaiting instructions from, now, MAZDAJapan.

It has been 10days and counting. 10 more days and i can file for lemon.

Any transmission specialist out there that can explain why the replacement did not resolve the problem?
Old Aug 18, 2009 | 10:07 PM
  #6  
ignoramus89's Avatar
Registered User
 
Joined: Aug 2009
Posts: 2
ignoramus89 is an unknown quantity at this point
Why are you letting the rpm's drop so low before you shift, and why are you double clutching?
Old Aug 20, 2009 | 11:18 AM
  #7  
djs2571's Avatar
Registered User
 
Joined: Mar 2007
Posts: 915
From: Newark,ny
djs2571 is on a distinguished road
There could be just a problem with that large of a differential in gearspeed. Try revving it a bit before shifting it into gear - it would help the gears mesh since the speed difference isn't as large.
This should be a similar issue if you try shifting into second when you're going 80...
Old Aug 22, 2009 | 10:25 AM
  #8  
edangs's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
edangs is an unknown quantity at this point
i got the car back and they ended up replacing the entire trans. i no longer get the grind from the same scenario.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stueck
3rd gen Engine/Drivetrain
8
Jul 29, 2007 06:47 PM
Stueck
3rd Gen Protege/MazdaSpeed/P5/MP3
0
Mar 31, 2006 01:09 PM
Bushwhacker
3rd Gen Protege/MazdaSpeed/P5/MP3
4
Sep 30, 2005 10:51 AM
JustinMP3
3rd gen Engine/Drivetrain
6
Aug 11, 2002 09:31 PM
JustinMP3
3rd gen Engine/Drivetrain
7
Jul 24, 2002 09:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:10 AM.