superprotege

Let me start by saying I hope this thread does not turn into a bashing of Hiboost and TBK Performance. I have read many threads on this forum and others that people have blasted both companies. I will be the first to tell you that things happened that should not have happened. I am not getting paid from either company, I am just sharing with the Mazda community, a new product that is available.

I have been told by both companies that changes have been made to prevent the same mistakes from re-occuring. I am hoping that anyone who decides to purchase this new product, will receive it in a timely and is satisfied with it.

The kit is basically a bigger GT35r (or the more streetable T3/TO4E is also available and making pretty the same power) mounted to Hiboost manifold and downpipe with all the accessories to bolt up to the stock exhaust. The kit makes 330 WHP on stock everything and pump gas. A software upgrade is in the works to increase HP. The test car will be soon fitted with a front mount intercooler to see how much HP can be gained.

I will update this thread with the price and when the kits are ready and available to be shipped out or you can visit Hiboost.com.

I am not a mechanic or an expert so any questions raised, I will consult Manuel and Juan for the answers. Again thank you for your interest.

Stock dyno run
http://www.youtube.com/watch?v=2rqCfFVrhSw

330 WHP run
http://www.youtube.com/watch?v=k-GlwXlBbsE

superprotege

I just got more detailed info making.

The kit is making 330 WHP at 12.5 psi

The kit includes, a big turbo, downpipe inlet & outlet pipe, oil lines inlet & outlet, hiflow turbo manifold, Tial 38mm wategate and all the other necessary accessories to bolt up to stock hardware.

With the T3/To4E Turbo, the kit is $2200
With the GT3071, GT3076 or GT35R, the kit is $2750

The Front mount Intercooler Kit is also ready. It comes with the intercooler and the piping to relocate it to the front of the car. The core is made in the USA with polished endtanks, no the cheap Chinesse knoeck off.

With HKS SSQV or Gredddy Type RS BOV, the kit is $950
Without the BOV, the kit is $825

The first batch of Front Mount Intercooler Kit and Turbo Upgrade Kits are being made and should be available in a month.

Stay tuned!! Photos to come

superprotege

Hi everyone, again sorry for the late response. Here the answers to some of the questions that have been asked so far. By some miracle, I was able to get Manuel and Juan together to answer the questions for you guys.

(1) Is the flange on the wastegate universal or specific tial- The flange is for a 38mm wastegate

(2) If you already have a dp and fmic, can you get the missing parts- Yes, prices for individual parts to the kit will be sold once the kits are ready

(3) Can the mazdaspeed3 handle over 330 whp especially if you have other performance parts and decide to purchase this kit- -Yes, the GT35R and the T3/To4E makes power very linearly throughout the powerband which prevents the engine from blowing even with the car untuned. The car comes from the factory very rich and even with this kit the car is still running rich. The stock turbo does not make power linearly and at high rpm, it is only making at times 180-200 whp and thus the boom!

(4) Is a base map available for a 06 2.3L with a 3 bar map sensor, T3/T4 turbo on 440cc injectors- No Manuel has a map for the above but with 440cc and 550cc injectors using the Haltech unit ofcourse.

(5) Where is the test car currently- It is in Columbia. Juan is going back to dyno test the kit with the front intercooler and get us some new dyno video soon.

(6) Where did you relocate the p/s cooler or does it block it- No, the p/s is still in the stock location

(7) Where is the boost pressure being measured from- intake manifold.

(8) What is the the intercooler size- core is 24x7x3

(9) How much torque is the car putting out- Juan did not remember when I asked him this question but I will get a response soon.

superprotege

Juan went back to the dyno and turned up the boost on pump gas.

465 WHP @ 19 psi
http://www.youtube.com/watch?v=Tnukd_n7aec

http://www.youtube.com/watch?v=UYGT15esBds

477 WHP @ 21 psi
http://www.youtube.com/watch?v=MkCHsX-pPhA

superprotege

The software is Cobb Accessport from Cobb Tuning. You can see it in the 465 whp video showing the psi.

Yes the car is running on stock internals. This is a customer's car so there is no plans of testing it till it blows.

These numbers make me feel like buying a speed3.

nolimit

im so sorry but that car is impossible to made that hp at the wheels at 8000 ft of elevation , so please what is the correction factor that dyno is using to make clear the real hp at the wheels ,also that i know pump gas i colombia is like 87 octane in premium no more than that, so what is the truth here? stock internals , stock clutch in that power no way

trev0006

Awesoem numbers. thsi is what I want to do to my car.

SilverSpeed3

where can this kit be purchased from?

and2418

would any one be able to help me out i have a 2006 mazda3 2.0l and i am looking for a turbo kit for it.. one that is not to much money but still a good bang for the buck i have found some but i am not sure how good they are any kind of feedback would be helpfull.. thank you