pin0yi30y

Does anyone know or have any fuel, boost, or whatever maps for the Haltech e6k with a 3 bar map sensor on the gtx motor (BP8Z). I'm running the stock 330cc injectors and a rx-7 fuel pump.
Any help is greatly appreciated. =)

turboge

I'll see what I can find, I ran the 330's a long time ago and they just weren't enough for running over 10psi. I may have an old map somewhere.

pin0yi30y

that would be awesome. =)

i'm geting a spike of 14 lbs but then it settles to about 10. it's due to a combination of issus i'll be taking care of within the next 2 weeks. 1) needing bigger piping. 2) boost controller

i appreciate anything you can find man. =)

Bruce95fmla

when are we gonna see some pics of under that hood,,,,......
Bruce

pin0yi30y

the car's in the shop now getting a makeover. when its doen. i'll have pics of it up =) if you goto the "bodykit" tread in exterior/interior you can see it's progress and see pics of the engine too.

turboge

I've got your map available, just need to find a floppy disk now to transfer it to the computer and upload it.

pin0yi30y

coo deal. i appreciate it man. if you want you can just zipit up and email it to me at patrick_santiago@hotmail.com.


is there anything i stil need to tune on that map? its for the 330 cc injectors? and all the stock goodness. i'm using a rx-7 fuel pump. do i need to change anything else because of that?

turboge

It is my 330cc dyno tuned map, good for 14psi. Should work well for you.