Speaker dimensions
March-6th-2003, 11:34 AM
#1
Protege Newbie
Thread Starter
Join Date: Mar 2003
Location: Thibodaux, LA
Posts: 10
Speaker dimensions
I don't feel like pulling apart my doors yet...
Does anyone know the speaker sizes in a 2003 Protege?
Also the woofer dimensions for the 2 rear doors...
Any modification advice would be thoughful too.
Chad
Does anyone know the speaker sizes in a 2003 Protege?
Also the woofer dimensions for the 2 rear doors...
Any modification advice would be thoughful too.
Chad
March-7th-2003, 08:37 AM
#2
Master of All Things :{D
Join Date: Feb 2002
Location: southeast texas, near houston
Posts: 4,118
well its all up there in that stickied thread...but here goes anyway...
the speakers in the front doors are 5 X 7's not sure what exact size the tweets are, AND the speakers in the rear doors are 6's.
in the front doors you can substitute in 6 X 8's if you like...and the rear doors you can put in 6 1/2's or even 6 3/4's if you like with no problem...
the thing you have to watch out for is mounting depth in the front doors....you are limited there. with NO spacers being used, maintain your mounting depth at a max of 2 1/2 inches. other wise the window will smack your speaker when you roll them down.
the rear doors are no problem at all...as you have about 4 1/2 inches of mounting depth to play with .
the speakers in the front doors are 5 X 7's not sure what exact size the tweets are, AND the speakers in the rear doors are 6's.
in the front doors you can substitute in 6 X 8's if you like...and the rear doors you can put in 6 1/2's or even 6 3/4's if you like with no problem...
the thing you have to watch out for is mounting depth in the front doors....you are limited there. with NO spacers being used, maintain your mounting depth at a max of 2 1/2 inches. other wise the window will smack your speaker when you roll them down.
the rear doors are no problem at all...as you have about 4 1/2 inches of mounting depth to play with .
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)