Problem with 2nd Gen 95 Protege
#1
Problem with 2nd Gen 95 Protege
I'm trying to install a new CD player in my 95 protege...
this stock head unit is a bitch to get out... any tips on getting this thing out with out damaging the trim?
this stock head unit is a bitch to get out... any tips on getting this thing out with out damaging the trim?
#5
What would a wiring harness run me at???
I found one at Autozone but its $23, and I think that's kinda steep for a wiring harness considering they sell ones at Walmart for domestics for $10...
Anywhere I can find a cheap wiring harness for a 95 protege?
I found one at Autozone but its $23, and I think that's kinda steep for a wiring harness considering they sell ones at Walmart for domestics for $10...
Anywhere I can find a cheap wiring harness for a 95 protege?
#6
all you need...
All you need is a couple short lengths of hanger wire, bent into u-shapes with the ends approximately 2 inches apart. There are little trim pieces on each side of the radio that pop out with a small knife or jeweler's screwdirver. Pop them out and you will see the holes you put your new radio pullers in. Push the wires into the hoes until they stop, but don't force them too hard. then ease the radio out. Should be a piece of cake if you are careful.
You can find wiring harness adapters at best buy, circuit city, k-mart, wal-mart, whatever. Just get the right ones. A good website to check out before starting is
www.installdr.com, they have wiring pinouts for the 95-98 proteges, plus images of the right harnesses. You might want to print the pages our before shopping to make sure you get the right stuff.
Check them out and get prepared!!
Good Luck!!
You can find wiring harness adapters at best buy, circuit city, k-mart, wal-mart, whatever. Just get the right ones. A good website to check out before starting is
www.installdr.com, they have wiring pinouts for the 95-98 proteges, plus images of the right harnesses. You might want to print the pages our before shopping to make sure you get the right stuff.
Check them out and get prepared!!
Good Luck!!
#7
i paid 8-10 dollars on my wire harness. $23 is way steep! The shops get them for around 4 bucks, that is robbery to charge 5 times the price at cost!! Sales like that and more means some one is getting a hell of a commission on their pay check!
MisterT
MisterT
Thread
Thread Starter
Forum
Replies
Last Post
protoge'00
3rd Gen Protege/MazdaSpeed/P5/MP3
13
June-2nd-2003 05:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)