jaisai01

i jsut got done installing my indiglo gauges thanks inpart with the help from negatize. he was a big help with all my constant ?'s.. but i thanks him for that. but they are worth the effort if you want soemthing special in ur pro. cuz not too many 3rd gen pro owners have um. ill post pics tomorrow or monday. thanks
arul

NegatiZE

Great! I can't wait for pics..

hihoslva

Okay - NEEDLES!!!! How did you get them off or deal with getting around them??????

Also - would you be willing to inspect your stock gauge faces, and see if the amber tinting on the backside can be peeled away?

~HH

NegatiZE

Here's the pic:

jaisai01

hihosilva, well to get um on i cut the gauges slightly to fit them over and tucked the wiring beaneath the current cluster.

hihoslva

Is it possible to remove the stock gauge faces and re-install them without destroying them?

BL_Protege

I used to have the indiglo gauges in my car. Unfortunately the fuel needle broke, so I used it for a little bit, but now I replaced the gauge cluster. I want the indiglos back, but i dont want to go through that process again. Like what i mean by that is, my friend had to keep taking out the needle and putting it back in to make sure that it read right. I read about the cutting procedure, but I dont know if that will ruin anything if i cut it too short. All the wiring is done and easy, i'm just worried about putting the indiglo's back on. Anyone who has experience with this, knows how to do this or has had it done please respond. Thanks.

njaremka

well, i might have found a solution to the cutting / needle removal conundrum. take a look at these two ebay auctions, and tell me if you notice what i noticed:

auction 1

auction 2

(here's a hint: in the first auction, the needle holes look quite a bit bigger)

BL_Protege

Yea thanks for that. I bought ones from united indiglo ( the small holed ones). The info was really helpful I think im just going to cut the holes bigger.

NegatiZE

Nik, if you look at Jaisai's picture again, he does have the new kind with the bigger holes. He still had to cut them though, so I guess they still weren't big enough.

jaisai01

ya. the hoel were still too small. i am thinking if you take a dremel tool and enlarge the hoels u might be fine. but no one has tried that yet.
arul

BL_Protege

To jaisai, negatize, and whoever else helped. Thanks a lot for all the info on the installation of gauges. I cut them and all. I'll post up pics soon.

BL_Protege

FINALLY I'VE gotten the picz up here they are


durin the day


green


blue


thanks 2 everyone for their helpful tips on installing

NegatiZE

Looks great!