thread size
#4
It's a metric size and I am not sure how they really rate the pitch, but when I threaded my stick after removing the extention I found a die that matched the extention at Sears. It's 10mm x 25. (also the die is stamped 1-25). I assume the 1 is for 10 mm or 1 cm.
Jeff M.
Jeff M.
#5
Originally posted by silver_p5_owner
It's a metric size and I am not sure how they really rate the pitch, but when I threaded my stick after removing the extention I found a die that matched the extention at Sears. It's 10mm x 25. (also the die is stamped 1-25). I assume the 1 is for 10 mm or 1 cm.
Jeff M.
It's a metric size and I am not sure how they really rate the pitch, but when I threaded my stick after removing the extention I found a die that matched the extention at Sears. It's 10mm x 25. (also the die is stamped 1-25). I assume the 1 is for 10 mm or 1 cm.
Jeff M.
The actual thread size is 10mm X 1.25 I know this for a fact as I took my shifter and measured it with a thread pitch guage, and supplied the maker of my custom shift **** with that size...and it fits perfectly.
Silver, the die you purchased is stamped 1-25 which is the pitch of the thread, 1.25. This means that there are 1.25 threads PER mm. The diameter of the thread is 10 mm.
this is true for all 3rd Gen Proteges EXCEPT the MP3 which has a different pitch. not sure what it is...bit I KNOW its different.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)