Secto1

3 things you need for your 10 mins mod:
1. knn or a filter open on the top
2. 2 long 12 inch screws same size as stock (not sure on size this is a crash course lol)
3. 2 nuts to filt the screws


injen cai ram air, i like cai cause you can un screw that little flap under the car where your filters at and now its ram air. ok how i did it is like this i got 2 long *** screws like 12 inches long the same size as the screws i took out, and got 2 nuts to go with them/ i put the screws through the holes at the bottom of that flap then screwed the nuts on the other side to hold the flap where i want it. (you can addjust it) then screwed the screws back in there holed now you have ram air! its verry easy to return the flap back into place this is only for race and a nice day if it rains your fucked oh i also changed that pos filter with a knn its awsome open on top for that ram air!!
the reason for the screws is because that flap will get pushed back by the air and will drag and scrape its frigen loud lol i know so i came up with this idea.
lol i made a fast diagram
want input lol yea or nay???
__________________

lowflowin

Or you could drill some holes in that plastic flap like I did, but I am sure it dosen't work as good as your diagram does since the air is forced from the flap right up into the intake. Good idea man, but i am way to lazy to change it back and forth all the time.

Secto1

its eazy how i did it to change it push it back up then put the stock screw you dident use back in it goes right up