0-60
Thread Starter
Protege Newbie
Joined: Nov 2003
Posts: 18
From: new jersey
0-60
For all of yous who would like to know.
Bone stock 02 protege ES
Max speed 69mph
56hp 64pk 51mph
0-60 8.5 sec
0-50 6.07 sec
0-40 4.30 sec
0-30 2.87 sec
0-20 1.45 sec
0-10 0.47 sec
1/8 mile 10.59/66.9mph
330ft. 6.80 sec
60ft. 2.35 sec
Bone stock 02 protege ES
Max speed 69mph
56hp 64pk 51mph
0-60 8.5 sec
0-50 6.07 sec
0-40 4.30 sec
0-30 2.87 sec
0-20 1.45 sec
0-10 0.47 sec
1/8 mile 10.59/66.9mph
330ft. 6.80 sec
60ft. 2.35 sec
Registered User
Joined: Jan 2004
Posts: 89
From: Bloody Hellhole called Texas
those #'s have to be wrong.
max speed is way off. I had a 96 ls protege and i reached 90 easily. and im pretty sure my car had 92hp so either ur car is way out of whack or you got it dyno'd at a really bad place.
max speed is way off. I had a 96 ls protege and i reached 90 easily. and im pretty sure my car had 92hp so either ur car is way out of whack or you got it dyno'd at a really bad place.
Cone Dancer
Joined: Mar 2004
Posts: 279
From: Central Calif
I think those are all 1/8 mile times, and the max speed was 69 mph for any of the 1/8 mile runs done that day? The HP #'s seem out of whack too though. Even at the wheels should be about 100 HP at least on a dyno. I dunno?
Registered User
Joined: Jan 2004
Posts: 69
From: Colorado
Originally posted by rustychops41
...The HP #'s seem out of whack too though. Even at the wheels should be about 100 HP at least on a dyno....
...The HP #'s seem out of whack too though. Even at the wheels should be about 100 HP at least on a dyno....
Figure 75+% of factory advertised 130 flywheel HP as an average figure at the wheels.
My P5 dynos at 105 WHP, 115 lbs/ft torque running Magnaflow CB and Injen CIA.